Shimano HG50 8 Speed Kassett

Beskrivning

Shimano 8-växlad kassett HG50, lämplig för Shimano 8-växlad växelsystem.

Tekniker

Tänder:
• 12-13-15-17-19-21-23-25
• 13-14-15-17-19-21-23-26

Montering

Mounting with special tools
To assemble and disassemble this cassette you will need specific cassette tools. These can be found here. For further explanation and a detailed instruction on how to use these tools, we refer you to our blog about changing a cassette. See this blog.

Don't forget the assembly grease!
The lockring on your cassette should be tightened up, in most cases up to 40Nm. To be able to loosen the cassette, we recommend you to apply a little bit of assembly paste to the lockring. Our assembly greases can be found here.

Användningstips

How often should I clean my bike? Regular cleaning ensures that your material lasts longer and that you can enjoy your cycling for longer. How often you need to clean depends on the weather conditions in which you ride. Do you cycle through all kinds of weather, or do you only go out when the sun is shining? It all affects the degree of wear and tear and some people will have to clean their bikes more often than others. Use the schedule below as a guide:

October to March:
• Clean every 200 km
• Rinse after every ride
• Dry and oil the chain after every ride
• Leave the bike to dry at room temperature

April to September:
• Clean every 300 km
• Rinse off after cycling in the rain
• Dry and oil the chain after polishing or rinsing
• Leave the bike to dry at room temperature

Läs mer på vår blogg