Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Deda Expander
Deda Expander
Rek. pris 331
307
24 rabatt
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceFör- & Nackdelar
För- & Nackdelar
- This long expander better distributes the force exerted on the fork tube.
- Can be adjusted very precisely.
- Easy assembly.
- Torque spanner recommended when fitting.
Specifikation
Specifikation
|
Märke
|
Deda |
|
Styrlagerdiameter
|
1 1/8 inch |
|
Färg
|
Svart |
Beskrivning
Beskrivning
The Deda Expander is suitable for carbon front forks with a 1 1/8 carbon fork tube. It allows you to tighten your headset system and take out head play.
You unscrew the hex bolt on top of the expander to remove the top cap. Underneath, you'll find a larger sized hex bolt. You unscrew this just enough to open it without the expander coming apart. Then you slide the bottom part into the fork tube. And tighten it well, preferably with a torque spanner.
Then mount the stem (without initially tightening it) and any spacers. And finally put the top cap on top and adjust the play on the headset with the hex. Don't forget to tighten the stem with a torque spanner!
Visa mer
Visa mindre
Montering
Before fitting the expander, it is useful to cut your carbon fork tube to the right length. This is not necessary in all cases. When it is at the right length already and filed smoothly, you can move on to the next step.You unscrew the hex bolt on top of the expander to remove the top cap. Underneath, you'll find a larger sized hex bolt. You unscrew this just enough to open it without the expander coming apart. Then you slide the bottom part into the fork tube. And tighten it well, preferably with a torque spanner.
Then mount the stem (without initially tightening it) and any spacers. And finally put the top cap on top and adjust the play on the headset with the hex. Don't forget to tighten the stem with a torque spanner!
Relaterade produkter
Relaterade produkter
|
|
|
|
|
| Deda Expander | BBB Cycling Styrlagerexpander PowerHead BAP-03 | Cannondale 2020 SuperSix EVO Stem Spacers | Cannondale 2019 SystemSix Stem Spacer Kit | |
| 0 recensioner | 21 recensioner | 3 recensioner | 1 recension | |
| Styrlagerdiameter | 1 1/8 inch | 1 1/8 inch | ||
| Färg | Svart | Svart | Svart | Svart |
| 307 | 245 | 245 | 356 | |
| Denna produkt | Visa produkt | Visa produkt | Visa produkt |
Deda Expander
Beskrivning
The Deda Expander is suitable for carbon front forks with a 1 1/8 carbon fork tube. It allows you to tighten your headset system and take out head play.Montering
Before fitting the expander, it is useful to cut your carbon fork tube to the right length. This is not necessary in all cases. When it is at the right length already and filed smoothly, you can move on to the next step.You unscrew the hex bolt on top of the expander to remove the top cap. Underneath, you'll find a larger sized hex bolt. You unscrew this just enough to open it without the expander coming apart. Then you slide the bottom part into the fork tube. And tighten it well, preferably with a torque spanner.
Then mount the stem (without initially tightening it) and any spacers. And finally put the top cap on top and adjust the play on the headset with the hex. Don't forget to tighten the stem with a torque spanner!