Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Deragliatore Posteriori Shimano Deore M6000 10 Speed
Deragliatore Posteriori Shimano Deore M6000 10 Speed
Questo prodotto è esaurito e non rientra più in assortimento.
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiDescrizione
Descrizione
Shimano Deore M6000 Shadow+ rear derailleur is suitable for the Medium cage GS for double (11-42). And in the Tall cage SGS variant suitable for Triple (11-32) (11-34) (11-36). Shifting is smoother and chain stability is improved compared to the RD-610. The Shimano Deore M6000 rear derailleur stands for reliable gear shifting with a rigid and open design. Thanks to Shadow technology, the rear derailleur is protected under the cassette. The + in Shadow+ stands for the possibility of adjusting the spring tension so that the chain does not rattle.
• Biggest sprocket possible: 36T
• Derailleur cage length: tall SGS
• Derailleur wheels: 11T
• Material: aluminium
• Capacity: 43T
To loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.
Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.
Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.
Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.
A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.
Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.
Mostra di più
Mostra di meno
Tecnologie
• Number of gears: 10-speed• Biggest sprocket possible: 36T
• Derailleur cage length: tall SGS
• Derailleur wheels: 11T
• Material: aluminium
• Capacity: 43T
Montaggio
Tightening and loosening the gear cableTo loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.
Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.
Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.
Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.
Consigli per l'utente
A crooked derailleur hanger?A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.
Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.
Recensione
Prodotti simili
Prodotti simili
|
|
|
|
| Shimano Deore M6000 10 Speed | SRAM GX 10-Speed | Wolf Tooth GoatLink Rear Derailleur Adapter | |
| 1 Recensione | 16 Recensioni | 1 Recensione | |
| Numero di rapporti | 10- velocità | 10- velocità | 10- velocità / 11- velocità |
| Metodo di cambio rapporti | Meccanico | Meccanico | |
| Lunghezza gabbia deragliatore | Gabbia media / Gabbia lunga / RD-M6000-SGS | Gabbia media / Gabbia lunga | |
| Capacità massima | 41D / 43D | ||
| Peso | 330 grammi | 302 grammi | |
| Il pignone più grande della cassetta | 36T / 42T | ||
| 64,48 | 58,43 | Da 28,18 | |
| Questo prodotto | Vedi prodotto | Vedi prodotto |
Deragliatore Posteriori Shimano Deore M6000 10 Speed
Descrizione
Shimano Deore M6000 Shadow+ rear derailleur is suitable for the Medium cage GS for double (11-42). And in the Tall cage SGS variant suitable for Triple (11-32) (11-34) (11-36). Shifting is smoother and chain stability is improved compared to the RD-610. The Shimano Deore M6000 rear derailleur stands for reliable gear shifting with a rigid and open design. Thanks to Shadow technology, the rear derailleur is protected under the cassette. The + in Shadow+ stands for the possibility of adjusting the spring tension so that the chain does not rattle.Tecnologie
• Number of gears: 10-speed• Biggest sprocket possible: 36T
• Derailleur cage length: tall SGS
• Derailleur wheels: 11T
• Material: aluminium
• Capacity: 43T
Montaggio
Tightening and loosening the gear cableTo loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.
Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.
Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.
Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.
Consigli per l'utente
A crooked derailleur hanger?A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.
Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.