Zipp 353 NSW Tubeless Disc Brake Road Bike Wheels

The Zipp 353 NSW wheelset is the first one with an integrated tyre pressure sensor, a cutting-edge technology that ensures you are always well prepared for your ride with the right tyre pressure. It is the ideal choice for the serious endurance rider and road cyclist aiming for top performance. With a lightweight design and varying rim height, the wheels are ready for tough climbs as well as fast rides on the flat with crosswinds.

Innovative technology for optimal control
The internal integration of the Zipp AXS Wheel Sensor in the 353 NSW wheels allows you to check tyre pressure without using external devices. If the indicator light is green, you are ready to ride while monitoring tyre pressure for the best settings. The sensor allows you to detect any problems early, so you are optimally prepared for all types of road surfaces.

Improved handling and durability
With a 35 to 40 mm rim height and a wider tread, the 353 NSW wheels are designed for aerodynamics and low rolling resistance, with a focus on the use of modern tyres and lower tyre pressures. The varying rim height from 35 to 40 mm reduces wind sensitivity and increases aerodynamics. The improved carbon layup has increased impact strength by no less than 16%. Whilst performing best with 30 mm tyres, the wheels can accommodate tyre widths ranging from 29 to 35 mm.

Zipp ZR1 SL hubs
The new Zipp ZR1 SL hubs have been specially developed for NSW high-end wheel sets. The hub uses a 6-pawl system, with three pawls placed with a slight deviation to create double the engagement. In this way, the hub has 66 engagement points, giving an engagement of 5.5 degrees. Thus, power is transferred to the wheel quickly and efficiently. The hubs use ceramic bearings for the lowest resistance and weight.

Tubeless ready
Making your wheels tubeless has never been easier. The rims are optimised for easy tool-free fitting, and no compressor is needed to fit the tyres. The wide hookless rims are also made for lower tyre pressures, especially with a tubeless setup. The maximum tyre pressure, therefore, is 'only' 5 Bar (72.2 PSI). The result is a larger contact surface with the ground for more traction and agility both on descents and when riding in wet conditions.

Hookless rims
Zipp's 353 NSW Tubeless Disc Brake rims are manufactured without hooks in which the tyre edges rest. The pressure of the inner tubes combined with the edges of the special hookless-compatible tyres ensure that the tyres stay in place. This allows you to fit wider tyres and to experience less resistance. In short: more comfort and higher speeds!

Zipp Lifetime Warranty programme
For ultimate security, the Zipp Lifetime Warranty programme gives you a lifetime warranty against manufacturing defects! The warranty is activated after registration of your wheel(set) with Zipp and is non-transferable upon sale.

Please note:
If you want to ride with inner tubes, you can only do so if you use tubeless-ready tyres, which are tighter on the rims than regular folding tyres.

If you want to use regular inner tubes with these wheels, you need inner tubes with screwed valves. You can then use the supplied adapter to be able to use the sensor.

• Zipp 353 NSW Tubeless Disc Brake wheels
• Tubeless rim tape
• Tubeless valves
• Centerlock lockring
• Zipp AXS wheel sensor
• Sealant injector