Roue Arrière DT Swiss PRC 1400 Spline 35

Les roues de vélo de route DT Swiss PRC 1400 Spline 35 sont très polyvalentes et peuvent donc être utilisées sur n’importe quel terrain. Que ce soit en montagne, sur un terrain vallonné ou sur le plat, la PRC 1400 SPLINE est capable de tout. Les roues DT Swiss PRC 1400 SPLINE 35 sont construites avec une jante en carbone de 35 mm de haut, des rayons droit rigides et un moyeu DT Swiss 240 haut de gamme.

• Paire de roues DT Swiss PRC 1400 SPLINE 35
• Blocages rapides DT Swiss RWS
• Fond de jante tubeless DT Swiss 21 mm
• Valves tubeless DT Swiss
• Patins de frein SwissStop Black Prince

• Cassette remover Shimano or Campagnolo
• (possibly a torque wrench)

Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.

• Pay attention to the direction of travel when mounting your tyres
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim