Pro User Diamant Bike Carrier

The Pro User Diamant (Diamond) bike carrier can transport two (electric) bikes and is very user-friendly. The quick connector allows you to mount it easily to the towbar. Using the optional ramp, simply ride the bikes into the wide aluminium wheel holders. The bikes are secured with a frame clamp, so there is no load on their crankset.

If you need something from the boot or if someone arrives with an extra suitcase, that's no problem at all. The carrier can be tilted 35 degrees to give you easy access to the boot.

The carrier can be folded into a compact package and transported in the boot in the included storage bag. The carrier can also be secured with the lock in the quick connector. So, you have everything you need to go out and make wonderful bike rides wherever you want!

• Colour: silver
• Material: coated steel + aluminium
• European approval granted by the RDW (Dutch vehicle control)

• Extremely easy and quick fitting onto the tow bar with the patented quick connector
• Lighting via a combined 7 and 13 -pin (Jaeger) plug
• Including fog light and reverse driving lighting (only works via the 13-pin plug)
• Suitable for almost all tow bars, all bicycles (also e-bikes) and wheel dimensions
• An ingenious folding system makes it easy to carry and store
• Trunk stays always accessible by an easy to use tilt mechanism

• Suitable for all type of bikes (also 29er mountain bikes)
• The bike carrier can be locked with lock on quick connector
• The bicycles are held in wide, stable aluminium wheel holders
• Flexible lockable and removable "Easy Fix”€ frame holders

• In combination with the ride-on ramp you can even more easy ride your bicycle onto the bike carrier

• Suitable for almost all bicycles
• Suitable for almost all towbars

• Comes with storage bag

The Pro User Diamant bicycle carrier is easy to install on all towbars. But what to do if it doesn't fit, or doesn't fit well, on the tow ball? In such cases it often helps to adjust the quick-release bolt. This bolt is located on the right-hand side of the metal casing that covers the tow bar.

• Remove the dust protection cap
• Loosen the locking nut slightly
• Screw in the setting screw one quarter of a turn
• Tighten the locking nut
• Check whether the bike carrier is now firmly seated on the towbar. If not, repeat the above steps and read the 'Maintenance' section in the manual

Is this bike carrier suitable for carbon frames?
This bike carrier does not have a separate adapter for carbon frames.

Is this bike carrier suitable for mountain bikes with fat tyres?
The maximum tyre width with this bike carrier is 50mm.

Is this bike carrier suitable for electric bikes?
Yes it is.

What is the maximum weight per bike?
The maximum weight per bike is 30kg.

What is the maximum total load weight of the bike carrier?
The maximum load weight of this bike carrier is 60 kg.