CyclOn Stay Fixed Carbon Paste

CyclOn Stay Fixed carbon paste is a mounting paste for carbon parts. This paste is meant for installing seatposts, handlebars and stems, for example. It contains small grains that ensure your parts are fixated more strongly, but can still be moved when you want to uninstall them. This prevents creaking noises and frame damage.

Application
Before applying the assembly paste, use a degreaser to clean the parts. You then rinse them with water. Apply the grease with a brush, or simply with your fingers. Excess paste can then be removed with a cloth.

Must-have
Stay Fixed mounting paste is not sensitive to temperature changes or moisture. The paste not only helps with assembly, but also makes disassembly easier. 150 ml is more than enough for years of maintenance. A must-have for every road cyclist or mountain biker.

How do I use carbon pastes?
Assembly grease should be applied to the component to be assembled and to the threads of bolts, if the component in question is carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.

Can I use ordinary mounting paste on my carbon parts?
No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you do not need to exceed the tightening moment and that your parts remain fixed for a long time.