Boeshield T-9

Boeshield T-9 is a waterproof lubricant for your bike chain. You can use it in all weather conditions, from wet winter rides to warm summer rides. Boeshield T-9 doesn't just lubricate: it also removes dirt and old lubricant from your chain. It penetrates deep into the moving parts of the chain, coating all of the metal in a thin coating. It then dries up into a transparent wax film that'll allow your chain to perform better, and will last for up to 300 km. The wax film isn't sticky, so it won't gather any sand, mud or dirt. Boeshield T-9 is an ideal product to keep your bike and chain in optimal condition.

Boeshield T-9 was developed in Boeing Company's aerospace laboratory, as a high-end lubricant for aviation. The innovative formula allows the Boeshield T-9 to easily penetrate into the metal pores of your bike chain, to keep moisture away from the metal and to stop existing corrosion.

Manual:
Apply to a completely clean chain, then allow it to penetrate for at least 2 hours to guarantee optimal performance. Then wipe the chain with a cloth, and you're done! Shaking for a few seconds before use improves its water resistance.

Can be applied to:
• Bike chain
• Derailleurs
• Outer cables
• Brake cables
• Crankset
• E-bike electronics and connectors
• Screw heads
• Seat post
• Spoke nipples
• Inner frame parts

Please note: Boeshield T-9 is not biodegradable.

• 1x Boeshield T-9 120 ml.

When and how often should I lubricate my chain?
This is a tricky question as it depends on how much you ride and what kind of lubricant you use. The best thing to do is to watch out for a dry chain. This can be seen or heard. Another sign that you need to relubricate is if your chain is very dirty, because you have been cycling in the rain for example. Make sure you first clean the chain before you lubricate it again. Eventually, you'll get a feeling for when it is best to lubricate.