Ruedas de Carretera Campagnolo Bora One 35
Ruedas de Carretera Campagnolo Bora One 35
Este producto está agotado y no volverá a estar disponible en nuestro surtido de productos.
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Envía un correo al servicio al clienteDescripción
Descripción
Las ruedas de bicicleta de carretera Campagnolo Bora One 35 tienen grandes propiedades de pedaleo gracias a su llanta de carbono de 35 mm. Las ruedas Campagnolo Bora One 35 son ligeras y cómodas, y reaccionan inmediatamente al acelerar. Son ideales para los terrenos montañosos y garantizan una fuerza de frenado constante en cualquier condición. Los bujes están dotados de rodamientos lisos y duraderos con una buena estanqueidad.
Konceptet är enkelt dock elegant: Hjulens balans garanteras av extra vikt precis mitt emot ventilen.
3DIAMANT
Processen eliminerar behovet för att “slita in” dina hjul, förbättrar bromsförmågan i både fuktiga och torra förhållanden samt möjliggör doserbar bromsning.
G3 GEOMETRY
Ett ekermönster som uppfunnits av Campagnolo som skiljer sig från en traditionell ekring i bättre kraftöverförande samt minskad belastning av ekrarna på höger sida. Det möjliggörs av G3-ekergeometrin. På höger finns dubbelt så många ekrar än på vänster vilket ger sidstyvhet.
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Mostrar más
Mostrar menos
Tecnología
DYNAMIC BALANCEKonceptet är enkelt dock elegant: Hjulens balans garanteras av extra vikt precis mitt emot ventilen.
3DIAMANT
Processen eliminerar behovet för att “slita in” dina hjul, förbättrar bromsförmågan i både fuktiga och torra förhållanden samt möjliggör doserbar bromsning.
G3 GEOMETRY
Ett ekermönster som uppfunnits av Campagnolo som skiljer sig från en traditionell ekring i bättre kraftöverförande samt minskad belastning av ekrarna på höger sida. Det möjliggörs av G3-ekergeometrin. På höger finns dubbelt så många ekrar än på vänster vilket ger sidstyvhet.
Montaje
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Consejos de uso
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Opinión
Productos relacionados
Productos relacionados
Campagnolo Bora One 35 | Campagnolo Bora WTO 45 | Scope R4 Rim | Campagnolo Bora WTO 33 | |
16 opiniones | 2 opiniones | 5 opiniones | 7 opiniones | |
Característica(s) de las ruedas | Ruedas ligeras para la montaña | Ruedas ligeras para la montaña / Ruedas aerodinámicas | Ruedas ligeras para la montaña / Ruedas aerodinámicas / Ruedas extra cómodas | Ruedas ligeras para la montaña / Ruedas aerodinámicas |
Tipo de Núcleo | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades / 9 - 12 speed | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades |
Peso (declarado por Mantel) | 1405 gramos | |||
Tipo de freno | Freno de llanta | Freno de llanta | Freno de llanta | Freno de llanta |
Tipo de Cubierta | neumático plegable | neumático plegable / Tubeless | neumático plegable / Tubeless | neumático plegable / Tubeless |
Peso total máximo | 110 kg | 110 kg | 95 kg | 110 kg |
1 699,00 | 1 699,00 | 1 498,00 | 1 699,00 | |
Producto actual | Ver producto | Ver producto | Ver producto |
Todas las especificaciones
General
Componentes
Material de la llanta
Carbón
Material Superficie Freno
Carbón
Material del radio
Acero Inoxidable
Tipo de cabecilla de radio
Externo
Material de la cabecilla de radio
Aluminio
Tipo de rodamientos
Copa-Cono
Número de radios en la rueda delantera
18
Número de radios en la rueda trasera
21
Medidas
En dotación
Pastillas de freno incluidas
Sí
Cierres rápidos incluidos
Si