Ruote Bici da Corsa Shimano Ultegra WH-RS700 C30
Ruote Bici da Corsa Shimano Ultegra WH-RS700 C30
Questo prodotto è esaurito e non rientra più in assortimento.
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiDescrizione
Descrizione
Il set di ruote per bici da strada Shimano Ultegra RS700 è il successore delle famose ruote Ultegra 6800 e quindi di livello Ultegra. Questa versione è 150 grammi più leggera in quanto sono stati utilizzati un cerchio in carbonio laminato e mozzi più leggeri. Il peso ridotto rende questo set di ruote ancora più reattivo, più facile da gestire in curva e in salita, sia in collina che in montagna. Inoltre, queste ruote sono anche tubeless per cui si può guidare senza camera d'aria.
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• Ruota anteriore: 946 grammi
• Ruota posteriore: 632 grammi
Mostra di più
Mostra di meno
Montaggio
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Consigli per l'utente
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
Domande frequenti
Peso dichiarato da Mantel• Ruota anteriore: 946 grammi
• Ruota posteriore: 632 grammi
Recensioni
Recensioni
5 / 5
Veramente molto per questo prezzo
- Sergio 26 dicembre 2019
Praticamente una ruota Dur-ace un poco più pesante ma con il grande vantaggio di essere per copertoncini tubeless. Se provi il tubeless non torni indietro nemmeno al tubolare
Pro e Contro
Tubeless rim
Tutta la qualità Shimano
Il canale di 15 mm
5 / 5
Consegna nei tempi previsti imballo al top e prodotto super!
- Alberto 13 luglio 2019
Ruote scorrevoli, non aerodinamiche all estremo ma d'altronde sono vendute come ruote da collina, stupefacenti nel fuorisella. Pienamente Soddisfatto di tutto
Pro e Contro
Aspetto
Mozzi
Scorrevolezza, rigidità
Prodotti simili
Prodotti simili
Shimano Ultegra WH-RS700 C30 | DT Swiss PR 1400 DICUT 32 OXiC | Campagnolo Zonda | Campagnolo Calima | |
26 Recensioni | 4 Recensioni | 158 Recensioni | 49 Recensioni | |
Caratteristica/e delle ruote | Ruote leggere per la montagna | Ruote leggere per la montagna | Ruote leggere per la montagna | Ruote di ricambio |
Tipo di corpetto | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / 9 - 10 - 11 speed | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / SRAM XDR 11 - 12 velocità | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / Campagnolo 9-12 velocità | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / Campagnolo 9-12 velocità |
Peso (dichiarato da Mantel) | 1578 grammi | 1595 | 1883 grammi | |
Tipo di freno | freno a pinza | freno a pinza | freno a pinza | freno a pinza |
Tipo di copertone | Pneumatico pieghevole / Tubeless | Tubeless | Pneumatico pieghevole | Pneumatico pieghevole |
Peso totale massimo | 120 kg | 130 kg | 110 kg | 110 kg |
644,28 | Da 382,13 | 402,30 | 190,56 | |
Questo prodotto | Vedi prodotto | Vedi prodotto | Vedi prodotto |
Tutte le caratteristiche tecniche
Generale
Componenti
Materiale del Cerchio
Carbonio
Materiale superficie frenante
Alluminio
Materiale raggio
Acciaio inossidabile
Tipo di nipple
Esterno
Materiale Nipple
Alluminio
Tipo di cuscinetti
Cono-sfera
Numero di raggi della ruota anteriore
16
Numero di raggi della ruota posteriore
21
Dimensioni
In dotazione
Pastiglie dei freni incluse
No
Sgancio rapido incluso
Si
Borse per ruote incluse
No