Parafango Anteriore Rapid Racer Products ProGuard Front

The Rapid Racer Product ProGuard Front mudguard can be made to fit any mountain bike, regardless of whether you have a 26 inch, 27.5 inch or 29 inch mountain bike. The Fender's good protective abilities make it ideal for enduro or downhill where a bit of protection against flying mud won't do any harm. Because of the compact shape that fits nicely around the wheel, it also grants protection at high speeds. And do you want to stand with your bike? Then you can order separate stickers that fit on the RRP ProGuard Front fender for an unique look.

Rapid Racer Products sizing: Standard

Tecnologie

This mudguard is attached to the front suspension bridge and is therefore not suitable for MTBs without front fork suspension.

Montaggio

Securing the mudguard:
1. Slide the mudguard into position near the front wheel
2. Hold the mudguard in position and make sure the tire has equal clearance on both sides
3. Now you can see which mounting holes are best for you to use
4. Remove the mudguard again and now press out the correct mounting holes
5. Tip: Place tape where the mudguard meets the front fork to prevent damage
6. Pass the tie-wrap through the mudguard and check the position again
7. Now pull the tie-wraps as tight as possible. Remember: a tight tie-wrap won't damage your fork, a loose one will!
8. Cut off the remaining ends
9. Before use, check whether the mudguard does not touch the frame when the front fork is compressed