Catena Cyclowax Pre-Waxed

The Cyclowax Pre-Waxed chain is super user-friendly: All you need to do is install it and you are ready to hop on your bike and go! It is available in multiple Shimano and SRAM versions, so you can choose your high-quality chain for your groupset.

Cyclowax Basic Wax
The chain has been treated with Cyclowax Basic Wax, a hot wax that is suitable for all conditions. So you can use the chain just as well for your rainy commuter rides as your fast gravel races.

Hot wax
Hot wax is an innovative form of lubrication for cyclists looking for maximum performance and minimum maintenance. Dipping your chain in melted wax adds a durable, clean layer that repels dirt and reduces wear. This not only ensures a quieter chain and better shifting performance but also extends the life of your bike components. Thus, with a hot waxed chain you will enjoy optimal chain and component performance and also be able to use your chain for a very long time. Plus, when it is time to re-wax your chain, you will not need to clean it first but can get started right away!

Maintenance of your hot waxed chain
Cyclowax recommends re-waxing the chain every 300 - 500 km. Before doing so, you don't need to degrease it, unless it is very dirty. If this is the case, clean the chain by putting it in boiling water, then dry before re-applying the wax. It is also advisable to regularly check your chain for wear: if it is more than 50% worn, you should replace it.

・Compatible with Shimano 11- and 12-speed (Ultegra and Dura Ace)
・Compatible with SRAM 12-speed (Force and Red) and 13-speed Red