Dérailleur Arrière SRAM Force 10 speed

The SRAM Force rear derailleur ensures thanks to the Exact Actuation for precise and noiseless shifting. The carbon/aluminium construction provides a stiff yet lightweight construction.

• Suitable for double or compact groups
• Material: aluminum/magnesium, carbon/aluminium cage
• Largest possible cog: 28T
• Smallest possible cog: 11T
• Maximum difference in teeth between the chainrings front: 16T
• Weight: 172 grams*

*Weighed by Mantel.

Tightening and loosening the gear cable
To loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.

Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.

A crooked derailleur hanger?
A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.

Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.