Zapatillas Shimano RP102

The Shimano RP102 road cycling shoes are an ideal choice for novice road cyclists who want to get to grips with clipless pedals in comfort. The supple synthetic upper fits snugly around the foot, and the breathable mesh prevents the foot from overheating while cycling on summer days. The three Velcro straps allow you to adjust the fit quickly and flexibly, without causing any pressure marks on the instep.

Fit and sizing advice
Shimano shoes generally run slightly smaller and narrower than standard street shoes. We therefore recommend ordering one size larger than your usual shoe size. Do you have a slightly wider foot? Perhaps you should go for two sizes larger to ensure there is enough room for your toes.

Compatible with:
All standard road bike pedal systems with a 3-point attachment, such as Shimano SPD-SL, Look Keo, Look Delta and Time Iclic

Not compatible with:
Mountain bike pedals or touring pedals with a 2-point SPD attachment (such as Shimano SPD or Crankbrothers)

In the box:
• 1 pair of Shimano RP102 road cycling shoes

Not included / still required:
• Cleats (such as Shimano SPD-SL in yellow, blue or red)
• Pedal sets (supplied with the purchase of new pedals)

You can easily put the cleats in place in under 10 minutes.

Difficulty level: Easy

Duration: 10 minutes

Tools required: Allen key (4 mm) and, if necessary, some assembly paste to put on the screw thread to prevent seizing.

Fitting tip: First, tighten the cleats by hand. Then put on your shoes and enter the system to determine the correct position of your feet. Only tighten the bolts securely when the angle feels right.

Prevent wear and tear: Avoid walking on the pavement in your cycling shoes as much as possible. If necessary, use cleat protectors when stopping for coffee to protect the cleats.

Care: After a wet or dirty ride, clean the shoes with a damp cloth and mild soapy water. Leave to dry at room temperature but not near a radiator to prevent warping.

Cold or wet conditions: As the mesh upper ventilates well, we recommend using overshoes in spring and autumn to protect against the cold and road spray.

How do the Shimano RP102 road cycling shoes fit?
The RP102 cycling shoes run smaller than normal street shoes, so we recommend ordering one size larger than your usual shoe size. If you have a slightly wider foot, we recommend choosing two sizes larger to ensure sufficient comfort in the toe area.

Which cleats do I need for the Shimano RP102 road cycling shoes?
For the RP102 cycling shoes, you will need road cycling cleats with a 3-point attachment system, such as the Shimano SPD-SL cleats or Look Kéo cleats. The shoes are not compatible with 2-point SPD cleats used on mountain bikes.

Are cleats included with the Shimano RP102 road cycling shoes?
No, cleats are not included with the RP102 cycling shoes. Cleats are always supplied as standard with new pedals, or you can order them separately if your current cleats need replacing.