Chaîne Shimano CN-HG71 HG

This chain can be used on all 6/7/8 speed Shimano drivetrains, and is also suitable for e-bike use.

• CN-HG71 chain
• Connector pin

Use a chain breaker tool to cut the chain to length
When you buy a chain, it is always too long and needs to be made to length. To achieve the right length, the chain needs to be broken, for which we use a chain breaker tool (or chain rivet tool). Click here to view our range of chain breaker tools. Make sure to choose one for the correct number of speeds!

Tips for chain fitting
When installing or removing this chain, it is useful to break tension on the section where you want to break the chain. To break tension, you can take an old spoke and make a hook, or use the hook already incorporated in some chain breaker tools. Put the hook into the section where you want to work on the chain, and this takes the tension off the chain locally.

Check for chain wear on a regular basis
Use a chain checker tool to check if your current chain is worn out, so you can replace it in time. Click here to go to our range of chain wear indicators.