Cassette SRAM XG-1199 XX1 11 speed

Ranging from 10- to 42-tooth, the Sram XG-199 XX1 11-speed X-DOME cassette offers an incredibly wide gear range while maintaining optimised steps. The single-unit cassette combines with the XD Body for a superior connection to the wheel.

• More solid hub connection
• Optimised gear steps across the entire range
• Only suitable for wheels with XD Body
• Teeth: 10-12-14-16-18-21-24-28-32-36-42
• Weight: 260 grams

SRAM XD(R) body
This cassette only fits an XD(R) body. With this type of body the cassette is a single piece. You slide the cassette over the body and then you can tighten the lockring. When installing an MTB XD cassette on an XDR body, a 1.85 mm spacer should be placed in between.

Mounting with special tools
To assemble and disassemble this cassette you will need specific cassette tools. These can be found here.

Don't forget the assembly grease!
The lockring on your cassette should be tightened up, in most cases up to 40Nm. To be able to loosen the cassette, we recommend you to apply a little bit of assembly paste to the lockring. Our assembly greases can be found here.

How often should I clean my bike? Regular cleaning ensures that your material lasts longer and that you can enjoy your cycling for longer. How often you need to clean depends on the weather conditions in which you ride. Do you cycle through all kinds of weather, or do you only go out when the sun is shining? It all affects the degree of wear and tear and some people will have to clean their bikes more often than others. Use the schedule below as a guide:

October to March:
• Clean every 200 km
• Rinse after every ride
• Dry and oil the chain after every ride
• Leave the bike to dry at room temperature

April to September:
• Clean every 300 km
• Rinse off after cycling in the rain
• Dry and oil the chain after polishing or rinsing
• Leave the bike to dry at room temperature