Reviews over the

Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3

Replaced the existing bottom bracket of my 2018 Ridley race bike with this model. Existing bracket involved a pressfit module, but the bracket from wheels can be mounted easily because the 2 elements rotate into each other and thus clamp together to the correct distance/tension. So no bottom bracket pressfit tool needed to assemble this part! I definitely wanted the enduro bearings as new bearings and these run very smoothly and prove their quality. Wheels also supplies the outer seals along to shield the bearings from any water and dirt. Bottom bracket also delivered with any spacer with different thicknesses for positioning the crankset because replacement can always give minimal difference in the position of the barrel of chain, and I was able to adjust it perfectly that way too.

Pros & Cons

Exact replacement bottom bracket I wanted. Quality is very good and was easy to fit. Will be much easier to maintain.

Pros & Cons

Pros & Cons

Bottom bracket has a size around 45.9mm on the pressfit part and my hole in the frame is 46mm, so it is loose in the hole. Could just push it in and move it back and forth a bit. No further opinion on the product.

Really happy with it - much better than the one I had

A very light, well manufactured bottom bracket, recommended by my local mechanic. If he thinks it's good, you know it is.

Pros & Cons