SRAM Force WiFLi 10-delad Bakväxel
SRAM Force WiFLi 10-delad Bakväxel
Denna produkt är utsåld och kommer inte tillbaka på lager.
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceBeskrivning
Beskrivning
SRAM Force WiFLi bakväxel använder en Exact Actuation teknik. Detta möjliggör en exakt växlingsrörelse med en noggrannhet på 3 mm på varje växel, med största räckvidden (upp till 32T).
Med bakväxeln WiFLi, ger SRAM en växelförare med förlängd bur på marknaden, varvid geometrin är något anpassad för att göra ett intervall av 11 till 32 T kassetter möjligt. Den nya serien av växlar är större än standard trippelsystemen, med denna växelförare sparar du minst 250 gram i jämförelse med en trippel.
Utsidan av buren är gjord av kolfiber med en inre länk gjord utav aluminium.
• Största drevet möjligt : 32T
• Minsta drevet möjligt : 11T
• Vikt: 188 gram*
* Vägd av Mantel.
To loosen and tighten the bolt with which the gear cable is attached to the derailleur, you need a 5 mm Allen key. You can find these here.
Removing the chain.
Before you can remove the derailleur, you will also have to remove the chain. How to do this, you can read here. You need a chain tool for that. We have these here. Make sure you buy one of the right brand and the right number of speed.
Use assembly grease for mounting.
If you are going to mount the new rear derailleur, it is best to apply some mounting paste to the threads of the derailleur hanger. You can buy this aseembly grease here.
Assembling jockey wheels.
To mount jockey wheels you need an Allen key of 2.5mm or 3mm. A handy Allen key can be found here:
A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.
Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.
Visa mer
Visa mindre
Med bakväxeln WiFLi, ger SRAM en växelförare med förlängd bur på marknaden, varvid geometrin är något anpassad för att göra ett intervall av 11 till 32 T kassetter möjligt. Den nya serien av växlar är större än standard trippelsystemen, med denna växelförare sparar du minst 250 gram i jämförelse med en trippel.
Utsidan av buren är gjord av kolfiber med en inre länk gjord utav aluminium.
Tekniker
• Material: aluminium B - knoge, magnesium inre länk, kol/aluminium bur• Största drevet möjligt : 32T
• Minsta drevet möjligt : 11T
• Vikt: 188 gram*
* Vägd av Mantel.
Montering
Loosen and tighten the gear cable.To loosen and tighten the bolt with which the gear cable is attached to the derailleur, you need a 5 mm Allen key. You can find these here.
Removing the chain.
Before you can remove the derailleur, you will also have to remove the chain. How to do this, you can read here. You need a chain tool for that. We have these here. Make sure you buy one of the right brand and the right number of speed.
Use assembly grease for mounting.
If you are going to mount the new rear derailleur, it is best to apply some mounting paste to the threads of the derailleur hanger. You can buy this aseembly grease here.
Assembling jockey wheels.
To mount jockey wheels you need an Allen key of 2.5mm or 3mm. A handy Allen key can be found here:
Användningstips
Skew derailleur hanger?A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.
Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.
Relaterade produkter
Relaterade produkter
SRAM Force WiFLi 10-delad | Campagnolo Veloce 10-delad | SRAM Force 10-delad | Shimano 105 5701 10 Speed | |
7 recensioner | 40 recensioner | 7 recensioner | 63 recensioner | |
Vilket gruppset har du? | SRAM Force | SRAM Force | Shimano 105 | |
Antal växlar | 10-delad | 10-delad | 10-delad | 10-delad |
Sätt att byta växel | Mekanisk | Mekanisk | Mekanisk | Mekanisk |
Största kassettkrans | 32T | 29T / 32T | 28T | 28T / 32T/30T |
Växelarmslängd | Lång växelarm | Kort växelarm / Medium växelarm | Kort växelarm | Kort växelarm / Lång växelarm |
Maxkapacitet | 37K | 32K / 37K | 33K | 34K / 37K |
1 390 | Från 1 034 | 1 192 | Från 596 | |
Denna produkt | Visa produkt | Visa produkt | Visa produkt |