Park Tool SAC-2 Kolfiberpasta

SAC-2 Park Tool monteringspasta bidrar till monteringen mellan två släta ytor, och skapar mer grepp. Perfekt för sadelstolpar, styren och styrstammar i karbon, aluminium och stål.

Tekniker

Note: This assembly grease contains hard pieces of Silica which gives it extra grip. This means you might get superficial marks on your parts.
This SAC-2 is also not suitable for threaded parts or bearings.

Montering

During assembly, the tightening torque can be reduced by 30% due to the adhesion of the paste.

Vanliga frågor

Can I use ordinary mounting paste on my carbon parts?
No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you do not need to exceed the tightening moment and that your parts remain fixed for a long time.

How do I use carbon pastes?
Assembly grease should be applied to the component to be assembled and to the threads of bolts, if the component in question is carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.