Reviews over the

Lezyne GoPro Led Adapter

Pros & Cons

Practical adaptor for placing the lezyne lamp directly under a GPS mount with gopro option for a sleek look and the lamp further forward so that it is more visible.

Great little appendix for mounting the lamp under the GPS bracket.

I bought this adapter to allow the Lezyne 800XL light to be mounted on the underside of the Garmin mount. I will say that I think the cost is excessive for a simple moulded plastic part, but the component does its job. Unfortunately, the tabs that engage on the counterpart are deformed and it is difficult at first assembly to fit it in place. It would also have been useful to provide a rubber washer to be placed between the adapter and the light so that once the adapter is screwed onto the metal cover of the light, it cannot rotate in place, because at present, without a rubber to create friction between the two components, there is a risk that vibrations while driving will cause the light to rotate, changing its direction and illumination field.

It does its job well and even mounted during transport on a car roof for 180 miles, everything is in place.

Functional. But disappointed by the fact that the screw for holding the lamp is not included. Quite expensive for a piece of plastic

Pros & Cons

It does the job

Pros & Cons

Very good adapter to attach the bike lamp to the GoPro base. Screws are not included (for GoPro connection and for attachment to the lamp).

Pros & Cons

Perfct to connect Lezyne light with a GoPro mount! In my case I used a K-Edge mount

Pros & Cons

Icm with an outfront mount for the bike computer with go pro capability, I can now attach the light. It's perfect, the light is nice and central, no cables in front and the handlebars remain free.

Pros & Cons

Came across this while searching for a alternative to SP connect bike light. Already owning a powerful Lezyne lamp, this adapter allowed me to re-mount the light in a very neat and aerodynamic position

Pros & Cons

Super practical adapter piece that not only fits GoPros, but also works for Lezyne front lights. By replacing the rubber mount with this part, lights can be attached to Zipp Service Course Quickview mounts, for example. The part fits very tightly, you have to press a bit, but it fits.

Pros & Cons

Good adapter to be able to mount the light on camera mounts. Comes with a small O-ring so as not to compromise the watertightness of the light. Very easy to mount. Does not include the screw, neither the one on the light nor the one on the Gopro mount.

Pros & Cons

Great construction for hanging a Lezyne lamp under the hidemybell (closethegap) with this. You still need the CloseTheGap attachment but then it sits very securely.

Pros & Cons

Bracket for my lezyne lite drive 1000 XL bracket, essential for attaching my Garmin speedo to the Go-pro stem mount. Totally fulfils its function. Shame it doesn't come with the fixing screw!

Pros & Cons

Installed perfectly and seems to be holding well. You don't need to tighten a lot to get a steady hold onto the light.

Pros & Cons

Just what I was looking for so I can clamp my Lezyne light under my Garmin.

Pros & Cons

It can be modified to make it easy to take the lamp in and out.

Pros & Cons

I bought this mount because my Garmin holder has a GoPro mount. I am able to install this adapter directly under the Garmin computer. This keeps the handlebars free.

Pros & Cons

Compatible with k-edge combo and with Rotor combo handlebar mount. The adapter comes with a rubber joint to protect the light from rain. I have k-edge handlebar mount on one bike and rotor handlebar mount on another bike. I leave the adapter on the lamp and the lamp changing fan bike is a breeze.

Pros & Cons

I have an aero handlebar from Most mounted on my road bike. It is very good to ride, but due to the width of the upper handlebar, lights cannot be attached by rubber. However, since a computer holder with GoPro mount is attached to the stem, I can illuminate my path well with this adapter. The adapter is well made, but could be a little thinner as it can only be inserted very tightly into the GoPro mount. It would also be helpful if the adapter came with a GoPro screw in addition to the screw for attaching the lamp. For these two points, there's a small deduction - otherwise a great product.

Pros & Cons

Very good product, works perfectly, very well made.

Pros & Cons