- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer ServicePros & Cons
Pros & Cons
- The sealant remains in liquid form for long: 2 to 7 months depending on the circumstances.
- Works in temperatures up to -35°C
Specifications
Specifications
Brand
|
Stan's NoTubes |
Yes | |
Volume
|
946 ml |
Injection hose
|
No |
Description
Description
The NoTubes Race Sealant offers optimal puncture protection for all tubeless and tubeless ready mountain bike tyres. The sealant stays in its liquid state for longer; depending on the conditions at least between 2 and 7 months. The sealant works in temperatures as low as -35 degrees Celsius and is environmentally friendly.
In short: the ultimate sealant for running tubeless. Trouble-free use of the Stans NoTubes Tyre Sealant in all tubeless ready mountain bike tyres and wheels.
Reviews
Reviews
Most recent reviews
5 / 5
Just top stuff
Been using it for years and is the best latex for me!
Pros & Cons
5 / 5
Top stuff
After previous bad experience with Squirt Beadblock, I ended up with this latex on the recommendation of a friend. Where Squirt sealed my leak with no possibility, it was no problem for stan's race Sealeant.
Pros & Cons
3 / 5
Good seal but awkward (haven't had any punctures yet)
I was used to using Schwalbe DocBlue, which I can apply through the valve (inner valve has to come out, of course, and you can use from a bottle or syringe). That won't work with this sealant because it's full of bits/ chunks so you're immediately stuck with blockages. Pouring directly into the tire and then continuing to mount is the only option. That's okay the first time, but less convenient when I need to refill once....
Pros & Cons
4 / 5
there are pebbles in it
With this sealant there are small stones in it, which makes it impossible to add the sealant through the valve, you are obliged to remove part of your tire, the effect of this sealant I can not say anything about, I suppose it will do its job well with that liquid product with those stones in it
Pros & Cons
5 / 5
Easy to use and very little mess.
Reviewed and found Stans to be the best to go with my first tubelsss setup. Worked great after watching a couple of youtube videos
Pros & Cons
5
Top stuff
After previous bad experience with Squirt Beadblock, I ended up with this latex on the recommendation of a friend. Where Squirt sealed my leak with no possibility, it was no problem for stan's race Sealeant.
-
Ideal for thinner (racing) tyres
-
Seals holes
-
Cannot be inserted through valve
-
Pricey
3
Good seal but awkward (haven't had any punctures yet)
I was used to using Schwalbe DocBlue, which I can apply through the valve (inner valve has to come out, of course, and you can use from a bottle or syringe). That won't work with this sealant because it's full of bits/ chunks so you're immediately stuck with blockages. Pouring directly into the tire and then continuing to mount is the only option. That's okay the first time, but less convenient when I need to refill once....
-
Good seal for now
-
Chunks, pieces in the liquid
-
Impossible to work through valve
4
there are pebbles in it
With this sealant there are small stones in it, which makes it impossible to add the sealant through the valve, you are obliged to remove part of your tire, the effect of this sealant I can not say anything about, I suppose it will do its job well with that liquid product with those stones in it
-
pebbles
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
Stan's NoTubes Race Sealant | Muc-Off Tubeless | Continental Revo | Silca Ultimate Tubeless Sealant | |
31 reviews | 33 reviews | 48 reviews | 0 reviews | |
Biodegradable | Yes | Yes | No | No |
Volume | 946 ml | 140 ml / 1000 ml | 60 ml / 240 ml / 1000 ml | 236 ml / 473 ml / 946 ml |
Injection hose | No | No | No | |
40,61 | From 14,18 | From 6,60 | From 29,43 | |
This product | View product | View product | View product |