Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Fulcrum Racing 6 Road Bike Wheels
Fulcrum Racing 6 Road Bike Wheels
1/7
This product is sold out, and will not come back in stock.
- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer ServiceDescription
Description
Fulcrum Racing 6 C17 wheels were already available in disc brake form, but now there’s a rim brake version. Quality-wise it’s somewhere between the Racing 7 and Racing 5. Thanks to the high flange in the rear wheel, it reacts immediately to acceleration after a turn or when sprinting. The use of straight pull spokes greatly decreases the likelihood of spokes breaking. This is why the Fulcrum Racing 6 C17 make a reliable wheel set to cycle kilometers on end.
• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play
Show more
Show less
Compatibility
• To be used with Shimano and/or SRAM 9/10/11 speed groupsets.Delivery includes
• Fulcrum Racing 6 wheels• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
Assembly
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
User tips
• Pay attention to the direction of travel when mounting your tyres• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play
Reviews
Reviews
5 / 5
OK
- Yve 2 February 2022
My previous wheels were Racing 7 type and 11 years old. They were not really nice and straight anymore. Hence replaced. I have only cycled 55 km with the new set. So can't say much about it. Rim is nice and straight. Looks nice. I am used to 23 mm tyres. These wheels require minimum 25 mm tyres. Because of the slightly lower pressure, the ride feels a lot more comfortable(softer). While riding, I did not hear any rattling from the body in neutral.
Pros & Cons
Accelerates well
Looks nice
No rattling body
Comes perhaps with time :-)
Automatic translation
5 / 5
well-satisfied
- Cees 25 March 2021
I have already driven 600 km with it again
Pros & Cons
look good
shipped quickly
Thickly over-satisfied
Automatic translation
5 / 5
Very good wheel for the money
- Helmut 17 August 2020
Automatic translation
5
Yve, 2 February 2022
OK
My previous wheels were Racing 7 type and 11 years old. They were not really nice and straight anymore. Hence replaced. I have only cycled 55 km with the new set. So can't say much about it. Rim is nice and straight. Looks nice. I am used to 23 mm tyres. These wheels require minimum 25 mm tyres. Because of the slightly lower pressure, the ride feels a lot more comfortable(softer). While riding, I did not hear any rattling from the body in neutral.
-
Accelerates well
-
Looks nice
-
No rattling body
-
Comes perhaps with time :-)
Automatic translation
Related products
Related products
|
|
|
|
|
| Fulcrum Racing 6 | Shimano 105 WH-RS300 | Campagnolo Calima | Shimano Ultegra WH-RS500 | |
| 9 reviews | 24 reviews | 49 reviews | 10 reviews | |
| Wheel characteristic(s) | Replacement wheels | Replacement wheels | Replacement wheels | Replacement wheels |
| Body Type | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed / Campagnolo 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed / Campagnolo 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed |
| Tyre width recommended by Mantel | up to 25 mm | up to 25 mm | up to 25 mm | up to 25 mm |
| Required valve length | > 40 mm / > 43 mm | > 39 mm | > 30 mm | > 38 mm |
| Weight (weighted by Mantel) | 1789 grams | 1883 grams | 1883 grams | 1659 grams |
| Brake Type | Rim brake | Rim brake | Rim brake | Rim brake |
| 222,62 | From 96,52 | 192,12 | From 202,29 | |
| This product | View product | View product | View product |
All specifications
General
Components
Sizes
Included in the delivery
Quick Releases included
Yes
Fulcrum Racing 6 Road Bike Wheels
All specifications
Brand
Fulcrum
General
Components
Sizes
Included in the delivery
Quick Releases included
Yes
Fulcrum Racing 6 Road Bike Wheels
Description
Fulcrum Racing 6 C17 wheels were already available in disc brake form, but now there’s a rim brake version. Quality-wise it’s somewhere between the Racing 7 and Racing 5. Thanks to the high flange in the rear wheel, it reacts immediately to acceleration after a turn or when sprinting. The use of straight pull spokes greatly decreases the likelihood of spokes breaking. This is why the Fulcrum Racing 6 C17 make a reliable wheel set to cycle kilometers on end.Compatibility
• To be used with Shimano and/or SRAM 9/10/11 speed groupsets.Delivery includes
• Fulcrum Racing 6 wheels• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
Assembly
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
User tips
• Pay attention to the direction of travel when mounting your tyres• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play