Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3

Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3
This product is sold out, and will not come back in stock.
Wheels Manufacturing Inc. PF30a

Available alternative

Wheels Manufacturing Inc. PF30a

573,00
View alternative

Ask a question about this product

Email Customer Service
mantel-customer-service

Description

Description

Nothing more annoying than a creaking bike. The culprit often are the bottom bracket cups and bearings. With the Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3 bottom bracket you will never have a creaking bike. They are flexible, last longer, and the bearings can be replaced quickly.

Wheels Manufacturing Inc. works together with Enduro. They have years of experience with producing bearings for industrial application, which is put to good use in the BB30 Enduro Bearings Abec 3. This in combination with two machine milled cups result in bearings of outstanding quality. Say goodbye to your creaking bicycle!

Technology

• Lagers: Enduro ABEC-3
• Bottom Bracket: PF30, Specialized Carbon OSBB
• Bottom Bracket width: 68mm - 73mm
• Bottom Bracket Shell I.D.: 46mm
• Crank type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI
• Crank spindle diameter: 24mm
• Weight: 153 gr
Show more Show less

Reviews

Reviews

4.7 / 5
Average from 26 reviews
5
4 reviews
4
1 review
3
1 review
2
0 reviews
1
0 reviews

Photos from customers


Most recent reviews

4 / 5

Quality alternative to pressfit bracket in carbon frame

- Wouter 29 April 2022

Replaced the existing bottom bracket of my 2018 Ridley race bike with this model. Existing bracket involved a pressfit module, but the bracket from wheels can be mounted easily because the 2 elements rotate into each other and thus clamp together to the correct distance/tension. So no bottom bracket pressfit tool needed to assemble this part! I definitely wanted the enduro bearings as new bearings and these run very smoothly and prove their quality. Wheels also supplies the outer seals along to shield the bearings from any water and dirt. Bottom bracket also delivered with any spacer with different thicknesses for positioning the crankset because replacement can always give minimal difference in the position of the barrel of chain, and I was able to adjust it perfectly that way too.

Pros & Cons

easy assembly
good explanation website Mantel
quality
quality bearings
weight
Automatic translation

5 / 5

Excellent product and easy to fit, recommended.

- Vic 5 January 2021

Exact replacement bottom bracket I wanted. Quality is very good and was easy to fit. Will be much easier to maintain.

Pros & Cons

Easy to fit
Made to high standard
Quality

5 / 5

does what it needs to do

- Nick 15 November 2020

Pros & Cons

price
Automatic translation

3 / 5

Does not fit in 46mm hole

- Gert 23 September 2020

Bottom bracket has a size around 45.9mm on the pressfit part and my hole in the frame is 46mm, so it is loose in the hole. Could just push it in and move it back and forth a bit. No further opinion on the product.

Automatic translation

5 / 5

Very good

- Ian 17 January 2017

Really happy with it - much better than the one I had

4

Wouter, 29 April 2022

Quality alternative to pressfit bracket in carbon frame

Replaced the existing bottom bracket of my 2018 Ridley race bike with this model. Existing bracket involved a pressfit module, but the bracket from wheels can be mounted easily because the 2 elements rotate into each other and thus clamp together to the correct distance/tension. So no bottom bracket pressfit tool needed to assemble this part! I definitely wanted the enduro bearings as new bearings and these run very smoothly and prove their quality. Wheels also supplies the outer seals along to shield the bearings from any water and dirt. Bottom bracket also delivered with any spacer with different thicknesses for positioning the crankset because replacement can always give minimal difference in the position of the barrel of chain, and I was able to adjust it perfectly that way too.

  • easy assembly
  • good explanation website Mantel
  • quality
  • weight
Automatic translation

5

Vic, 5 January 2021

Excellent product and easy to fit, recommended.

Exact replacement bottom bracket I wanted. Quality is very good and was easy to fit. Will be much easier to maintain.

  • Easy to fit
  • Made to high standard
  • Quality

5

Nick, 15 November 2020

does what it needs to do

  • price
Automatic translation

3

Gert, 23 September 2020

Does not fit in 46mm hole

Bottom bracket has a size around 45.9mm on the pressfit part and my hole in the frame is 46mm, so it is loose in the hole. Could just push it in and move it back and forth a bit. No further opinion on the product.

Automatic translation

5

Ian, 17 January 2017

Very good

Really happy with it - much better than the one I had


Related products

Related products

Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3
Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3
From 482,40
This product
Wheels Manufacturing Inc. PF30a
Wheels Manufacturing Inc. PF30a
573,00
Rotor 4624 MTB
Rotor 4624 MTB
215,80
Enduro Bearings TorqTite PF30
Enduro Bearings TorqTite PF30
925,70
Compare the products above
Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3 Wheels Manufacturing Inc. PF30a Rotor 4624 MTB Enduro Bearings TorqTite PF30
Wheels Manufacturing Inc. PF30 Enduro Bearings Abec 3 Wheels Manufacturing Inc. PF30a Rotor 4624 MTB Enduro Bearings TorqTite PF30
26 reviews 0 reviews 2 reviews 0 reviews
Suitable for Race / MTB Race / MTB Race / MTB
Crankset axle fit Shimano Hollowtech II (24 mm) / SRAM GXP (24mm) Shimano Hollowtech II (24 mm) Shimano Hollowtech II (24 mm) Shimano Hollowtech II (24 mm)
Bottom Bracket Width 68 mm / 73 mm 73 mm Asymmetric (Cannondale) 68 mm / 73 mm 68 mm / 73 mm
Bottom Bracket Diameter 46 mm 46 mm 46 mm 46 mm
Colour Black / Red Black Black Black
Screwthread No No No
From 482,40 573,00 215,80 925,70
This product View product View product View product