Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Park Tool BBT-30.4 Pressfit Bottom Bracket Tool
- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer ServicePros & Cons
Pros & Cons
- This tool is very easy to use.
- All Park Tools are of very high quality.
- You also need to order a Park Tool to mount the bearings.
Specifications
Specifications
|
Brand
|
Park Tool |
| Best | |
|
Suitable for crankset axle size
|
BB30 (30 mm) |
Description
Description
Park Tool BBT-30.4 Brackettool Pressfit is provided with a longer diameter suitable to remove fatbike's bottom brackets.
Reviews
Reviews
Most recent reviews
4 / 5
Quality tools
Slightly large tip for insertion into the Pressfit Blackbearings Press Fit 41-86/92-DUB bottom bracket. Perhaps not the most suitable tool for this type of bottom bracket?
5 / 5
Completely meets my expectations
The guides ensure that you tap out the old bearings precisely and straight, without damaging the frame. Also thanks to the included cups, with a piece of threaded rod it is an easy job to press fresh bearings into your frame.
Pros & Cons
3 / 5
Solid but not versatile enough.
Not suitable for pressing PF30 cups with 41/42 mm outer diameter. They are too small for that.
Pros & Cons
5 / 5
It doesn't get any better
What you wait 3 days for at a bike shop you do yourself in 2 minutes with this
Pros & Cons
2 / 5
Frame runner if you're unlucky.
I am very handy but my bottom bracket bearing was very stuck, probably, due to sand getting into my Cervelo R3 frame. I slapped hard but didn't dare go any further. This is not the force normally exerted on a frame so it is more vulnerable. Got one side out. Stopped and got another tool that can remove my pressfit 30 bearing by turning and not punching, and also reinsert it with an included press, for €45.00.
Pros & Cons
5
Completely meets my expectations
The guides ensure that you tap out the old bearings precisely and straight, without damaging the frame. Also thanks to the included cups, with a piece of threaded rod it is an easy job to press fresh bearings into your frame.
-
Fits well
-
Press cups included
-
Sturdy
2
Frame runner if you're unlucky.
I am very handy but my bottom bracket bearing was very stuck, probably, due to sand getting into my Cervelo R3 frame. I slapped hard but didn't dare go any further. This is not the force normally exerted on a frame so it is more vulnerable. Got one side out. Stopped and got another tool that can remove my pressfit 30 bearing by turning and not punching, and also reinsert it with an included press, for €45.00.
-
Easy to use
-
Backlash on tool
-
Dangerous to break frame
Frequently bought together
Frequently bought together
Related product
Related product
Compare the products above
|
|
|
| Park Tool BBT-30.4 Pressfit | BBB Cycling BracketKit BTL-95 | |
| 47 reviews | 76 reviews | |
| Quality | Best | Better |
| Suitable for crankset axle size | BB30 (30 mm) | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) / BB30 (30 mm) |
| 47,33 | 72,47 | |
| This product | View product |
Park Tool BBT-30.4 Pressfit Bottom Bracket Tool
Description
The Park Tool BBT-30.4 Bracket Tool Press Fit is an indispensable tool for removing BB30, EVO30, BBright and PF30 bearings. This Park Tool comes with a tool to remove BB30 and PF30 bearings. Not suitable for frames, whereby the bearings are glued with paste. Also includes two press rings to press the bearings named above inside the frame. However, in order to assemble them a press is still required.Park Tool BBT-30.4 Brackettool Pressfit is provided with a longer diameter suitable to remove fatbike's bottom brackets.