Freno a Disco Shimano Deore M6120
Freno a Disco Shimano Deore M6120
Prezzo consigliato 151,23
Da 105,82
45,41 di sconto
Seleziona una versione per visualizzare la disponibilità attuale
- Consegna 2-4 giorni lavorativi
- Consegna monitorata gratuita
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiPro e Contro
Pro e Contro
- Due to the 4 pistons in each caliper, the braking power of these brakes is very high.
- Shimano's Servo Wave technology ensures that these brakes are extra easy to dose.
- These brakes are delivered as J-kit. This means you can install them in a frame with internal cable routing without venting.
- These brakes are heavier than higher-end brakes.
Caratteristiche tecniche
Caratteristiche tecniche
Marca
|
Shimano |
Applicazione
|
Trail / Enduro |
Livello base | |
Numero di pistoni nella pinza
|
4 pistoni |
Possibilità di regolazione
|
Distanza tra la leva e il manubrio (reach) con chiave Allen o Torx |
Morbido (Resina/Organico) | |
J-Kit spurgato | |
Montaggio Freno
|
Post Mount |
Shimano A |
Descrizione
Descrizione
The Shimano Deore M6120 MTB disc brakes are powerful brakes with high controllability. These brakes have double pistons, which makes the braking power extra high. This makes them very suitable for Trail & Enduro mountain biking.
High braking power, good controllability.
The Shimano Deore M6120 MTB disc brakes have four pistons in the caliper. This gives you extra high braking power, allowing you to stop faster on rough trails. The dosage is also very good thanks to Shimano's Servo Wave technology. This technology means that the pistons move faster in the first half of the brake movement than in the second half. This allows you to better modulate the braking force, making it easier to overcome difficult courses.
Delivered as J-kit
These Shimano Deore M6120 MTB Disk Brakes are delivered as a J-kit. This means that the hydraulic brake line is mounted to the caliper and also bled. However, the brake line is not yet attached to the brake lever. This allows you to easily pull the cable through a frame with internal cable routing. If you then mount the line to the brake lever, you do not need to bleed it.
If you switch to a different brand of disc brake or want to fit a different size rotor, you may need an adapter between frame and caliper.
These adapters can be found here.
Mostra di più
Mostra di meno
High braking power, good controllability.
The Shimano Deore M6120 MTB disc brakes have four pistons in the caliper. This gives you extra high braking power, allowing you to stop faster on rough trails. The dosage is also very good thanks to Shimano's Servo Wave technology. This technology means that the pistons move faster in the first half of the brake movement than in the second half. This allows you to better modulate the braking force, making it easier to overcome difficult courses.
Delivered as J-kit
These Shimano Deore M6120 MTB Disk Brakes are delivered as a J-kit. This means that the hydraulic brake line is mounted to the caliper and also bled. However, the brake line is not yet attached to the brake lever. This allows you to easily pull the cable through a frame with internal cable routing. If you then mount the line to the brake lever, you do not need to bleed it.
Compatibilità
Adapters for calipersIf you switch to a different brand of disc brake or want to fit a different size rotor, you may need an adapter between frame and caliper.
These adapters can be found here.
Spesso acquistati insieme
Spesso acquistati insieme
Prodotti simili
Prodotti simili
Shimano Deore M6120 | Shimano MT501 + MT520 | Shimano XT M8120 Trail | Shimano SLX Trail M7120 | |
0 Recensioni | 0 Recensioni | 6 Recensioni | 3 Recensioni | |
Composizione | Set / Freno anteriore / Freno posteriore | Set / Freno anteriore / Freno posteriore | Set / Freno anteriore / Freno posteriore | Set / Freno anteriore / Freno posteriore |
Applicazione | Trail / Enduro | Trail / Enduro | Trail / Enduro | Trail / Enduro |
Livello | Livello base | Livello base | Livello intermedio | Livello intermedio |
Numero di pistoni nella pinza | 4 pistoni | 4 pistoni | 4 pistoni | 4 pistoni |
Possibilità di regolazione | Distanza tra la leva e il manubrio (reach) con chiave Allen o Torx | Distanza tra la leva e il manubrio (reach) con comoda manopola / Punto di aggancio del freno (bitepoint) | Distanza tra la leva e il manubrio (reach) con comoda manopola | |
Durezza | Morbido (Resina/Organico) | Morbido (Resina/Organico) | ||
Da 105,82 | Da 100,82 | Da 150,23 | Da 131,02 | |
Questo prodotto | Vedi prodotto | Vedi prodotto | Vedi prodotto |
Tutte le caratteristiche tecniche
Generale
Marca
Shimano
Possibilità di regolazione
Distanza tra la leva e il manubrio (reach) con chiave Allen o Torx
Montaggio Freno
Post Mount
Posizione freno e leva freno
Anteriore / Sinistra / Posteriore / Destra
Tipo di olio per freni a disco
Olio Minerale Shimano
Colore
Nero
Impiego
Applicazione
Trail / Enduro