Ruote Bici da Corsa DT Swiss PRC 1400 Spline 35
Ruote Bici da Corsa DT Swiss PRC 1400 Spline 35
Questo prodotto è esaurito e non rientra più in assortimento.
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiDescrizione
Descrizione
The DT Swiss PRC 1400 Spline 35 road bike wheels are very all-round and can therefore be used everywhere. Whether it is in the mountains, on hilly terrain or on flat roads, the PRC 1400 SPLINE can handle it all! The DT Swiss PRC 1400 SPLINE 35 wheels are equipped with a 35 mm high carbon rim, rigid straight pull spokes and a top class DT Swiss 240 hub.
• DT Swiss RWS Quick Release
• DT Swiss Tubeless Tape 21 mm
• DT Swiss Tubeless Valves
• SwissStop Black Prince Brake Pads
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
Mostra di più
Mostra di meno
La consegna include
• DT Swiss PRC 1400 SPLINE 35 wheelset• DT Swiss RWS Quick Release
• DT Swiss Tubeless Tape 21 mm
• DT Swiss Tubeless Valves
• SwissStop Black Prince Brake Pads
Montaggio
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Consigli per l'utente
• Pay attention to the direction of travel when mounting your tyres• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
Prodotto simile
Prodotto simile
Confronta i prodotti sopra elencatiDT Swiss PRC 1400 Spline 35 | DT Swiss PR 1400 DICUT 32 OXiC | |
2 Recensioni | 4 Recensioni | |
Caratteristica/e delle ruote | Ruote leggere per la montagna | Ruote leggere per la montagna |
Tipo di corpetto | SRAM XDR 11 - 12 velocità / Shimano / SRAM / 9 - 10 - 11 / 12 speed | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / SRAM XDR 11 - 12 velocità |
Peso del produttore | 1486 grammi | 1630 grammi |
Tipo di freno | freno a pinza | freno a pinza |
Tipo di copertone | Pneumatico pieghevole / Tubeless | Tubeless |
Peso totale massimo | 100 kg | 130 kg |
Da 577,74 | Da 382,13 | |
Questo prodotto | Vedi prodotto |
Tutte le caratteristiche tecniche
Generale
Componenti
Materiale del Cerchio
Carbonio
Materiale superficie frenante
Carbonio
Materiale raggio
Acciaio inossidabile
Tipo di nipple
Esterno
Materiale Nipple
Alluminio
Tipo di cuscinetti
Industriale
Numero di raggi della ruota anteriore
20
Numero di raggi della ruota posteriore
24
Dimensioni
In dotazione
Pastiglie dei freni incluse
Sì
Sgancio rapido incluso
Si
Borse per ruote incluse
No