Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Lubrificante Morgan Blue Syn Lube Wet Spray
Lubrificante Morgan Blue Syn Lube Wet Spray
1/2
Questo prodotto è esaurito e non rientra più in assortimento.
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiDescrizione
Descrizione
The Morgan Blue Syn Lube Spray is a lubricant that is ideal for use in spring and winter and wet conditions. The selected additive pack ensures excellent water, frost and corrosion resistance. Used for lubrication of chain, gearbox and rotating parts. Clean the chain regularly with chain cleaner. This prevents wear by limiting the build-up of dirt.
Use
Apply for the first time:
1. Thoroughly degrease your drivetrain with chain cleaner and rinse thoroughly.
2. Dry the parts well with a cloth.
3. Then apply the Lube to the middle of the entire chain.
4. Allow the Lube to penetrate well. At least half an hour, but preferably longer.
5. Then wipe off any excess Lube with a cloth, especially the outside of the chain because that is where the most dirt sticks and lubrication is not needed.
6. Go for a ride!
For post-treatment, wipe the chain with a dry cloth or brush and then apply the lubricant to the entire chain again.
How often should I lubricate my chain? Regular lubrication ensures that your material lasts longer and you enjoy your cycling for longer. How often you should lubricate depends very much on the weather conditions in which you cycle. Do you cycle in all weathers or only when it is sunny shines? It all affects the degree of wear and some people will have to clean their bikes more than others.
In principle a chain should run silently, so if your chain makes a noise it is time to clean and lubricate it.
Mostra di più
Mostra di meno
Use
Apply for the first time:
1. Thoroughly degrease your drivetrain with chain cleaner and rinse thoroughly.
2. Dry the parts well with a cloth.
3. Then apply the Lube to the middle of the entire chain.
4. Allow the Lube to penetrate well. At least half an hour, but preferably longer.
5. Then wipe off any excess Lube with a cloth, especially the outside of the chain because that is where the most dirt sticks and lubrication is not needed.
6. Go for a ride!
For post-treatment, wipe the chain with a dry cloth or brush and then apply the lubricant to the entire chain again.
Compatibilità
Suitable for use on the chain in wet weather conditions and all cycling disciplines, so suitable for your road bike, MTB, gravel bike, city bike or e-bike!La consegna include
1x Spray Can Morgan Blue Syn Lube Wet SprayConsigli per l'utente
Before application, degrease, clean and dry the chain well.How often should I lubricate my chain? Regular lubrication ensures that your material lasts longer and you enjoy your cycling for longer. How often you should lubricate depends very much on the weather conditions in which you cycle. Do you cycle in all weathers or only when it is sunny shines? It all affects the degree of wear and some people will have to clean their bikes more than others.
In principle a chain should run silently, so if your chain makes a noise it is time to clean and lubricate it.
Prodotti simili
Prodotti simili
|
|
|
|
|
| Morgan Blue Syn Lube Wet Spray | Muc-Off Dry Lube Spray | Muc-Off C3 Dry Ceramic Lube | Muc-Off C3 Wet Ceramic Lube | |
| 7 Recensioni | 0 Recensioni | 89 Recensioni | 23 Recensioni | |
| Biodegradabile | No | No | No | No |
| Da usare in | Condizioni di bagnato | Condizioni di asciutto | Condizioni di asciutto | Condizioni di bagnato |
| Tipo di lubrificante | Olio | Olio | Olio | Olio |
| Confezione | Bomboletta spray | Bomboletta spray | Flacone | Flacone |
| Misura | 400 ml | 400 ml | 50 ml / 120 ml | 50 ml / 120 ml |
| 12,05 | 13,06 | Da 15,07 | Da 15,07 | |
| Questo prodotto | Vedi prodotto | Vedi prodotto | Vedi prodotto |
Lubrificante Morgan Blue Syn Lube Wet Spray
Descrizione
The Morgan Blue Syn Lube Spray is a lubricant that is ideal for use in spring and winter and wet conditions. The selected additive pack ensures excellent water, frost and corrosion resistance. Used for lubrication of chain, gearbox and rotating parts. Clean the chain regularly with chain cleaner. This prevents wear by limiting the build-up of dirt.Use
Apply for the first time:
1. Thoroughly degrease your drivetrain with chain cleaner and rinse thoroughly.
2. Dry the parts well with a cloth.
3. Then apply the Lube to the middle of the entire chain.
4. Allow the Lube to penetrate well. At least half an hour, but preferably longer.
5. Then wipe off any excess Lube with a cloth, especially the outside of the chain because that is where the most dirt sticks and lubrication is not needed.
6. Go for a ride!
For post-treatment, wipe the chain with a dry cloth or brush and then apply the lubricant to the entire chain again.
Compatibilità
Suitable for use on the chain in wet weather conditions and all cycling disciplines, so suitable for your road bike, MTB, gravel bike, city bike or e-bike!La consegna include
1x Spray Can Morgan Blue Syn Lube Wet SprayConsigli per l'utente
Before application, degrease, clean and dry the chain well.How often should I lubricate my chain? Regular lubrication ensures that your material lasts longer and you enjoy your cycling for longer. How often you should lubricate depends very much on the weather conditions in which you cycle. Do you cycle in all weathers or only when it is sunny shines? It all affects the degree of wear and some people will have to clean their bikes more than others.
In principle a chain should run silently, so if your chain makes a noise it is time to clean and lubricate it.