Reviews over the

BBB Cycling ParkingLot BTL-126

Fine as expected

Pros & Cons

A good and sturdy support. Bike hangs well in it

Pros & Cons

Be careful not to let the "hang part" rest against your spoke, then you have a chance of damaging your spokes.

Pros & Cons

I wanted to give my bike a nice spot on the wall, the bike is easy to take out of the bracket, and hangs back in again in no time. The only thing I miss is a protective strip for the rear wheel to keep the wall clean.

Pros & Cons

Easy to mount bracket and bike is easy to hang in it by the wheel. Does not damage carbon wheels. Saves space in the shed

Pros & Cons

Works great for my mountain bike with 2.3 tires.

Pros & Cons

Easy assembly and very practical

Pros & Cons

The packaging says an 8 mm drill bit, but you really need a 10 mm drill bit (as it says on the plugs themselves)! The road bike and the MTB are happily hanging on the wall now, great.

Pros & Cons

Very solid, clear instructions. Screw set included are not suitable for drywall, would have been helpful if it was in the description.

Pros & Cons

If you have around high rims it is a tremendously easy thing. Don't know how high you can go with rims, but for my rims that are standard on my Scott it's perfect!

Pros & Cons

Does what you expect it to do

Sturdy bike holder and easy to assemble. Just make sure you have drill bit 10 because it needs to be fixed with serious screws.

Pros & Cons

The holder is fine, convenient to use. For smaller cyclists (women, children) it might be difficult to hang the bike in it. What is annoying is that the assembly instructions on the back of the package state that 8mm holes must be drilled, but then it turns out that 10mm plugs are included. Also, the 10mm plugs turn out to be a little too small for a 10mm hole, so I ended up using my own plugs.

Pros & Cons

Very sturdy in terms of material and easy to mount. Just a pity that I cannot hang my mountain bike up with it because the tires and rim are too wide

Pros & Cons