Ruedas de Carretera Fulcrum Racing Zero Carbon
Ruedas de Carretera Fulcrum Racing Zero Carbon
Este producto está agotado y no volverá a estar disponible en nuestro surtido de productos.
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Envía un correo al servicio al clienteDescripción
Descripción
The Fulcrum Racing Zero Carbon 2019 road bike wheels are real climbing wheels for hilly terrain. However, because of the light rims, the Fulcrum Racing Zero Carbon wheels also perform well in terms of acceleration. Not only does the performance stand out, but the Fulcrum Racing Zero Carbon wheels also look amazing. They are perhaps one of the most beautiful wheels you can have in your road bike.
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Mostrar más
Mostrar menos
Montaje
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Consejos de uso
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Productos relacionados
Productos relacionados
Fulcrum Racing Zero Carbon | Scope R5 Rim | Campagnolo Bora WTO 60 | Campagnolo Bora WTO 45 | |
5 opiniones | 2 opiniones | 3 opiniones | 2 opiniones | |
Tipo de Núcleo | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades / 9 - 12 speed | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades | SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades / Campagnolo 9-12 velocidades |
Peso (declarado por Mantel) | 1340 gramos | |||
Tipo de freno | Freno de llanta | Freno de llanta | Freno de llanta | Freno de llanta |
Tipo de Cubierta | neumático plegable | neumático plegable / Tubeless | neumático plegable / Tubeless | neumático plegable / Tubeless |
Peso total máximo | 109 kg | 120 kg | 110 kg | 110 kg |
Tipo de rueda | Juego de ruedas | Juego de ruedas | Juego de ruedas | Juego de ruedas |
1 399,00 | 1 498,00 | 1 699,00 | 1 699,00 | |
Producto actual | Ver producto | Ver producto | Ver producto |
Todas las especificaciones
General
Componentes
Material de la llanta
Carbón
Material Superficie Freno
Carbón
Material del radio
Aluminio
Tipo de cabecilla de radio
Externo
Material de la cabecilla de radio
Aluminio
Tipo de rodamientos
Industrial
Número de radios en la rueda delantera
16
Número de radios en la rueda trasera
21
Medidas
En dotación
Pastillas de freno incluidas
Sí
Cierres rápidos incluidos
Si
Bolsas para ruedas incluida
Si