Lezyne Pressure Over Drive Floor Pump

The Lezyne Pressure Over Drive is the ideal floor pump for tubeless thanks to the extra air chamber.

High pressure
The Pressure Over Drive has the ability to pump up to 220 psi or 15 bar. As a result, there is no bicycle tyre that you cannot get to the correct pressure. The only drawback of the extra air chamber is that it has to be filled before you can inflate a normal bicycle tyre. To inflate an inner tube or tubeless tyre that already has pressure in it, you will need to match it before you can increase the tyre pressure.

High-quality design
The Pressure Over Drive is made of high-quality and strong materials, such as aluminum and steel. Not only does this ensure the pump lasts a long time and looks good, these materials also enhance the pump's performance. As a finishing touch, this pump has an ergonomic wooden handle and a sturdy base for extra stability. Because the pump stroke is extra long, every tire can be inflated with the greatest of ease. Furthermore, the pump hose is reinforced with nylon. This increases durability. A pump hose often suffers a lot and is often one of the parts that wears the fastest. With this reinforcement you don't have to worry about that.

Tubeless
Proper seating of a tubeless tyre is made easier if a lot of air is pumped into the tyre in a very short time. The secondary pressure chamber of the Lezyne Pressure Over Drive makes this very easy. All you have to do is build up the air pressure in the pressure chamber. When you have built up enough pressure, push the lever at the bottom of the pump with your foot. This discharges the pressure chamber and forces a powerful and continuous stream of air into the tire within seconds. This ensures that the bead of the tyre seats easily.

Technology

ABS1 Pro
The letters on the ABS1 Pro pump head stand for Air Bleeding System. With the ABS1 Pro pump head you can easily let air out of the tire by just pressing a button. This allows you to adjust the tire pressure exactly to your wishes! Furthermore, the ABS1 Pro is suitable for Presta and Schrader valves. By simply turning the attachment of the pump head you can switch between the two types of valves. The ABS1 Pro is at a 90 degree angle. This, in combination with the long pump hose, makes it easier to reach the valve. To top it off, the ABS 1 Pro pump head also has a built-in valve core remover.

Colour: black
Maximum pump pressure: 220 psi / 15 bar

User tips

Meer informatie over het gebruik van deze pomp vind je hier.

Frequently asked questions

Kan ik de Lezyne Pressure Over Drive ook als reguliere pomp gebruiken?
Ja dat kan zeker! Houdt er wel rekening mee dat het iets langer kan duren voordat je band is opgepompt omdat de lucht via de extra luchtkamer de band in gaat.

Kan ik losse onderdelen vervangen van deze Lezyne Pressure Over Drive als dat nodig is?
Ja! Er zijn diverse onderdelen van deze pomp die los te vervangen zijn. Wij hebben helaas geen reserve onderdelen van Lezyne pompen in ons assortiment.