Wheels Manufacturing Inc. PF30A Cannondale Shimano
Wheels Manufacturing Inc. PF30A Cannondale Shimano
Vejl. udsalgspris 1 387
1 014
373 rabat
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- The tread makes sure the bearings stay firmly in the frame.
- The aluminium bottom bracket will last a long time.
- The bearings are well sealed and turn smoothly.
- If the bearings are worn out, you can replace them fairly easily yourself.
- This bottom bracket is heavier than a plastic bottom bracket.
Specifikationer
Specifikationer
Mærke
|
Wheels Manufacturing Inc. |
Egnet til
|
Race / MTB |
Shimano Hollowtech II (24 mm) | |
Bredde på krankboks
|
73 mm Asymmetrisk (Cannondale) |
Diameter på krankboks
|
46 mm |
Ydre diameter krankbokse
|
44 mm |
Farve
|
Sort |
Gevind
|
Nej |
Typ krankbokse
|
Pressfit 30A |
Beskrivelse
Beskrivelse
The Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket is made of two durable aluminum cups that must be screwed together inside the frame. This ensures that these bottom bracket bearings stay firmly in the frame for long life. Plus, this makes these bearings very easy to maintain!
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
• 24mm cranksets
Vis mere
Vis mindre
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Teknologier
Bearings: Enduro ABEC-3Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
Kompatibilitet
• Cannondale PF30A frames• 24mm cranksets
Relatered produkt
Relatered produkt
Sammenlign ovennævnte produkterWheels Manufacturing Inc. PF30A Cannondale Shimano | Rotor 4624 MTB | |
0 Anmeldelser | 2 Anmeldelser | |
Egnet til | Race / MTB | Race / MTB |
Kranksæt pasform | Shimano Hollowtech II (24 mm) | Shimano Hollowtech II (24 mm) |
Bredde på krankboks | 73 mm Asymmetrisk (Cannondale) | 68 mm / 73 mm |
Diameter på krankboks | 46 mm | 46 mm |
Ydre diameter krankbokse | 44 mm | |
Farve | Sort | Sort |
1 014 | 382 | |
Dette produkt | Se produkt |