Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
1/5
Vejl. udsalgspris 2 134
1 442
692 rabat
På lager
(10+)
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- Denne bagskifter har en kobling. Det holder kæden endnu bedre fast på kassetten.
Specifikationer
Specifikationer
|
Mærke
|
SRAM |
| 12-speed | |
| Mekanisk | |
| Lang arm | |
|
Vægt
|
276 gram |
|
Hvilket gruppesæt har du?
|
SRAM XX1 / X01 |
Beskrivelse
Beskrivelse
På grund af den større 12-speed kassette i Sram X01 Eagle gruppen er X-Horizon designet af bagskifteren af Srams X01 12-speed blevet tilpasset. Buret er blevet lidt længere og det nederste pulleyhjul har fået 14 tænder i stedet for 12 tænder. Roller Bearing Clutch er yderligere blevet finere og leverer en mere konstant styrke over hele burets slag.
• Re-engineered mounting system and repositioned CAGE LOCK™ add robustness
• Eagle™ pulley technology provides greater efficiency, crisper shifting and quieter
• Aluminum cage and lightweight hardware make it light and tough
To loosen and tighten the bolt with which the gear cable is attached to the derailleur, you need a 5 mm Allen key. You can find these here.
Removing the chain.
Before you can remove the derailleur, you will also have to remove the chain. How to do this, you can read here. You need a chain tool for that. We have these here. Make sure you buy one of the right brand and the right number of speed.
Use assembly grease for mounting.
If you are going to mount the new rear derailleur, it is best to apply some mounting paste to the threads of the derailleur hanger. You can buy this aseembly grease here.
Assembling jockey wheels.
To mount jockey wheels you need an Allen key of 2.5mm or 3mm. A handy Allen key can be found here:
A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.
Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.
Vis mere
Vis mindre
Teknologier
• Completely redesigned rear derailleur incorporating our proven X-HORIZON™ design and new Type-3 ROLLER BEARING CLUTCH™ technology• Re-engineered mounting system and repositioned CAGE LOCK™ add robustness
• Eagle™ pulley technology provides greater efficiency, crisper shifting and quieter
• Aluminum cage and lightweight hardware make it light and tough
Montering
Loosen and tighten the gear cable.To loosen and tighten the bolt with which the gear cable is attached to the derailleur, you need a 5 mm Allen key. You can find these here.
Removing the chain.
Before you can remove the derailleur, you will also have to remove the chain. How to do this, you can read here. You need a chain tool for that. We have these here. Make sure you buy one of the right brand and the right number of speed.
Use assembly grease for mounting.
If you are going to mount the new rear derailleur, it is best to apply some mounting paste to the threads of the derailleur hanger. You can buy this aseembly grease here.
Assembling jockey wheels.
To mount jockey wheels you need an Allen key of 2.5mm or 3mm. A handy Allen key can be found here:
Tips til brug
Skew derailleur hanger?A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.
Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.
Anmeldelser
Anmeldelser
Gennemsnitlig fra 8 Anmeldelser
Nyeste anmeldelser
4 / 5
Fantastisk produkt, og meget hurtig Mantel webshop service
- Paul 14 oktober 2022
Fordi min gx-skifter havde meget slør efter mange års brug, købte jeg denne. Den skifter stadig en smule bedre end gx'en (også en ny).
Fordele og ulemper
Kan kombineres med andre SRAM-skiftere
Skifter fint
Solid
Pris
Automatisk oversat
4 / 5
SRAM gør, hvad der skal gøres med det samme!
- Bertus 27 april 2022
Første ordre fra Mantel, alt gik glat, hurtig levering!
Fordele og ulemper
Nem montering
Skifter problemfrit
ingen
Automatisk oversat
5 / 5
Super produkt
- Willem 24 februar 2022
God derailleur, skifter perfekt og en opdatering til cyklen.
Fordele og ulemper
Hurtig og god levering.
Super afbrydere
Automatisk oversat
5 / 5
Skifter perfekt
- Julian 3 december 2020
Fordele og ulemper
Super kvalitet
Dyrt. Alle Sram-dele er relativt dyre.
Automatisk oversat
5 / 5
Fantastisk!
- Marcus 8 oktober 2020
Fantastisk support! Hurtig levering og sidst, men ikke mindst, en forfærdelig god pris.
Automatisk oversat
Ofte købt sammen
Ofte købt sammen
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| SRAM X01 Eagle 12-speed | Shimano XTR M9100 12 Speed | SRAM GX Eagle 12-speed | SRAM XX1 Eagle 12-speed | |
| 8 Anmeldelser | 7 Anmeldelser | 142 Anmeldelser | 12 Anmeldelser | |
| Antal gear | 12-speed | 12-speed | 12-speed | 12-speed |
| Måde at skifte gear på | Mekanisk | Mekanisk | Mekanisk | Mekanisk |
| Bagskifter type | Lang arm | Mellem arm / Lang arm | Lang arm | Lang arm |
| Vægt | 276 gram | 243 gram | 290 gram | 264 gram |
| Største mulige tandhjul | 50T / 52T | 45T / 51T | 50T / 52T | 50T / 52T |
| Farve | Sort / Rød | Sort | Lunar Grey | Black / Gold / Lunar |
| 1 442 | Fra 1 707 | 857 | Fra 1 941 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
SRAM X01 Eagle 12-speed Bagskifter
Beskrivelse
På grund af den større 12-speed kassette i Sram X01 Eagle gruppen er X-Horizon designet af bagskifteren af Srams X01 12-speed blevet tilpasset. Buret er blevet lidt længere og det nederste pulleyhjul har fået 14 tænder i stedet for 12 tænder. Roller Bearing Clutch er yderligere blevet finere og leverer en mere konstant styrke over hele burets slag.Teknologier
• Completely redesigned rear derailleur incorporating our proven X-HORIZON™ design and new Type-3 ROLLER BEARING CLUTCH™ technology• Re-engineered mounting system and repositioned CAGE LOCK™ add robustness
• Eagle™ pulley technology provides greater efficiency, crisper shifting and quieter
• Aluminum cage and lightweight hardware make it light and tough
Montering
Loosen and tighten the gear cable.To loosen and tighten the bolt with which the gear cable is attached to the derailleur, you need a 5 mm Allen key. You can find these here.
Removing the chain.
Before you can remove the derailleur, you will also have to remove the chain. How to do this, you can read here. You need a chain tool for that. We have these here. Make sure you buy one of the right brand and the right number of speed.
Use assembly grease for mounting.
If you are going to mount the new rear derailleur, it is best to apply some mounting paste to the threads of the derailleur hanger. You can buy this aseembly grease here.
Assembling jockey wheels.
To mount jockey wheels you need an Allen key of 2.5mm or 3mm. A handy Allen key can be found here:
Tips til brug
Skew derailleur hanger?A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.
Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.