Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
1/2
Vejl. udsalgspris 148
124
24 rabat
På lager
(Kun 1)
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace over 399 kr
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- Ensures that carbon parts stay in place without damaging them.
- Reduces the required tightening torque so that your carbon parts last longer.
Specifikationer
Specifikationer
|
Mærke
|
Muc-Off |
| Nej | |
|
Volumen
|
50 ml |
| Ja |
Beskrivelse
Beskrivelse
Muc-off Carbon Gripper has been developed to prevent carbon components torqued to a lower amount from slipping or coming undone. After all, you don't want your saddle to drop all of a sudden! This is why the people at Muc-off have created a simple but effective solution in the form of this highly advanced Carbon Gripper paste!
The Muc-Off Carbon Gripper provides friction between the carbon clamping areas, due to the anti-slip formula. This means you no longer have to exceed the recommended tightening torque, which in turn reduces the risk of material fatigue, internal fractures or a shortened lifespan of your components.
• 'Anti-slip' formula
• Specially designed for carbon parts
No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you do not need to exceed the tightening moment and that your parts remain fixed for a long time.
How do I use carbon pastes?
Assembly grease should be applied to the component to be assembled and to the threads of bolts, if the component in question is carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.
Vis mere
Vis mindre
The Muc-Off Carbon Gripper provides friction between the carbon clamping areas, due to the anti-slip formula. This means you no longer have to exceed the recommended tightening torque, which in turn reduces the risk of material fatigue, internal fractures or a shortened lifespan of your components.
Teknologier
• Keeps parts in place• 'Anti-slip' formula
• Specially designed for carbon parts
Ofte stillede spørgsmål
Can I use ordinary mounting paste on my carbon parts?No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you do not need to exceed the tightening moment and that your parts remain fixed for a long time.
How do I use carbon pastes?
Assembly grease should be applied to the component to be assembled and to the threads of bolts, if the component in question is carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.
Anmeldelser
Anmeldelser
Gennemsnitlig fra 10 Anmeldelser
Nyeste anmeldelser
5 / 5
Godt produkt
- Miquel 30 maj 2023
Det var det, jeg ledte efter til sadelpinden.
Automatisk oversat
5 / 5
zadel terug muurvast
- Dries 8 september 2021
Had al een tijdje problemen met een krakend en zakkend zadel... Met de Mucc-off carbon gripper is dit problem definitief van de baan
Fordele og ulemper
Biologisk
zadel terug muurvast
Automatisk oversat
5 / 5
Meget god at dosere, og duften er virkelig god til et fedtstof.
- Michael 23 marts 2021
Endnu et topprodukt fra Mucoff
Fordele og ulemper
Ikke kun egnet til kulstof
Meget god at dosere
Meget god til forarbejdning
Automatisk oversat
5 / 5
Alt er perfekt
- Bart 11 februar 2021
Alt er perfekt, som det skal være
Automatisk oversat
5 / 5
Gør arbejdet godt
- Nicklas 9 september 2020
Som mange andre ting inden for cykelvedligeholdelse - du har ikke brug for dem så ofte, men når du har, har du virkelig brug for dem.
Fordele og ulemper
effektiv
pris
Automatisk oversat
Ofte købt sammen
Ofte købt sammen
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Muc-Off Carbon Gripper | Dynamic All Round Grease | Dynamic Carbon | CyclOn Stay Fixed | |
| 10 Anmeldelser | 8 Anmeldelser | 9 Anmeldelser | 70 Anmeldelser | |
| Biologisk nedbrydeligt | Nej | Nej | Nej | Nej |
| Volumen | 50 ml | 150 gram | 400 gram / 20 gram / 5 gram / 80 gram | 150 ml / 500 ml |
| Til montering af carbondele | Ja | Ja | Ja | Ja |
| 124 | 109 | Fra 62 | Fra 113 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Muc-Off Carbon Gripper
Beskrivelse
Muc-off Carbon Gripper has been developed to prevent carbon components torqued to a lower amount from slipping or coming undone. After all, you don't want your saddle to drop all of a sudden! This is why the people at Muc-off have created a simple but effective solution in the form of this highly advanced Carbon Gripper paste!The Muc-Off Carbon Gripper provides friction between the carbon clamping areas, due to the anti-slip formula. This means you no longer have to exceed the recommended tightening torque, which in turn reduces the risk of material fatigue, internal fractures or a shortened lifespan of your components.
Teknologier
• Keeps parts in place• 'Anti-slip' formula
• Specially designed for carbon parts
Ofte stillede spørgsmål
Can I use ordinary mounting paste on my carbon parts?No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you do not need to exceed the tightening moment and that your parts remain fixed for a long time.
How do I use carbon pastes?
Assembly grease should be applied to the component to be assembled and to the threads of bolts, if the component in question is carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.