Campagnolo Bora One 35 Cykelhjul Racer

Campagnolo Bora One 35 road bike wheels have great riding properties thanks to their 35mm carbon rim. Campagnolo Bora One 35 wheels are light and comfortable, and they react immediately when accelerating. They are great for hilly terrain and ensure consistent braking power in all conditions. The hubs are equipped with smooth, durable bearings with good sealing.


This Bora 35 wheel set uses very smooth running USB ceramic cup cone bearings. The Bora wheels have an internal rim width of 17mm. This makes 25mm tyres fit better on the rim which improves rolling resistance and comfort. The AC3 braking edge technology ensures better braking performance in wet conditions.

G3 spoke geometry
Campagnolo has devised a spoke pattern which, compared to a traditional spoked wheel, makes it possible to improve energy transfer and reduce the load on the spokes on the right-hand side. This is achieved in the G3 spoke geometry with double the number of spokes on the right side for more lateral stiffness.

Teknologier

DYNAMIC BALANCE
The concept is both simple and elegant: balance the wheel by adding a small weight opposite of the valve.

3DIAMANT
This new process eliminates the "breaking-in" period, improves braking performance in both wet and dry conditions, and ensures better modulation and smoother braking performance.

G3 GEOMETRY
Campagnolo came up with a spoke pattern which improves power transfer and reduces stress on the drive side compared to a traditionally laced wheel. They call this the G3 spoke geometry, which uses twice the number of spokes on the right side compared to the left in order to increase the lateral rigidity of the wheel.

Montering

• Cassette remover Shimano or Campagnolo
• (possibly a torque wrench)

Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.

Tips til brug

• Pay attention to the direction of travel when mounting your tyres.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.