Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Bulls Copperhead 3S
Bulls Copperhead 3S
Dieses Produkt ist derzeit ausverkauft und kann nicht mehr nachgeliefert werden.
- Probe fahren und Abholung in einem unserer Geschäfte
- Mantel Umtauschservice
- Trustpilot-Bewertung 4.7/5
Stell eine Frage über dieses Produkt
Schicke dem Kundenservice eine MailBeschreibung
Beschreibung
The Bulls Copperhead 3 S is a hardtail mountain bike that takes your performance to the next level. This is thanks to the lightweight aluminium frame which also has a very fine finish. This makes the Copperhad 3S a very good mountain bike for fanatic mountain bikers.
The Copperhead's frame is made of lightweight aluminium. With the thru axles it steers very precisely and the discs are sure to be perfectly aligned at all times. The cables go neatly through the frame tubes, so they are well protected. So it doesn't just look nice but it also rides very well.
The assembly is mostly done with Shimano XT parts. The crank, the shifters and the rear derailleur are from the XT line. Many equally priced mountain bikes often save on these parts and therefore this Copperhead 3S performs just a bit better than many competitors. The Fox front fork gives very smooth damping, so you can easily ride over tricky obstacle. Moreover, with the lockout on the handlebars you can easily lock this front fork on asphalt. When you get back on the trail, the Magura MT 4 trail disc brakes with 180mm discs provide the necessary control and braking power.
This makes the Bulls Copperhead 3 S a very fine mountain bike ready to take your performance to the next level.
Mehr anzeigen
Weniger anzeigen
The Copperhead's frame is made of lightweight aluminium. With the thru axles it steers very precisely and the discs are sure to be perfectly aligned at all times. The cables go neatly through the frame tubes, so they are well protected. So it doesn't just look nice but it also rides very well.
The assembly is mostly done with Shimano XT parts. The crank, the shifters and the rear derailleur are from the XT line. Many equally priced mountain bikes often save on these parts and therefore this Copperhead 3S performs just a bit better than many competitors. The Fox front fork gives very smooth damping, so you can easily ride over tricky obstacle. Moreover, with the lockout on the handlebars you can easily lock this front fork on asphalt. When you get back on the trail, the Magura MT 4 trail disc brakes with 180mm discs provide the necessary control and braking power.
This makes the Bulls Copperhead 3 S a very fine mountain bike ready to take your performance to the next level.
Mögliche Alternative
Mögliche Alternative
|
|
|
|
|
| Bulls Copperhead 3S | Trek Marlin 8 Gen 3 | Cube Reaction Pro | Scott Scale 980 | |
| 0 Bewertungen | 1 Bewertung | 2 Bewertungen | 0 Bewertungen | |
| Rahmenhöhe | 41 cm / 46 cm / 51 cm / 56 cm / 61 cm / 1.64m - 1.70m | XXS / XS / S / M / ML / L / XL / XXL / 1.54m - 1.58m | M / L / XL / XXL / 1.71m - 1.76m | S / M / L / XL / XXL / 1.59m - 1.70m |
| Modell | Herren | Damen / Herren | Herren | Herren |
| Rahmenmaterial | Aluminium | Aluminium / Alpha Silver | Aluminium | Aluminium |
| Anzahl der Gänge | 12 Gänge | 12 Gänge | 12 Gänge | 12 Gänge |
| Laufradgröße | 29 Zoll | 26 Zoll / 27,5 Zoll / 29 Zoll | 29 Zoll | 29 Zoll |
| Disziplin | XC- Crosscountry | XC- Crosscountry | XC- Crosscountry | XC- Crosscountry |
| 1.399,- | 999,- | 1.299,- | 980,84 | |
| Dieses Produkt | Produkt anzeigen | Produkt anzeigen | Produkt anzeigen |
Alle Spezifikationen
Allgemein
Schaltung und Bremsenteile
Lieferumfang
Pedalen
Ja, Plattformpedale
Bulls Copperhead 3S
Alle Spezifikationen
Marke
Bulls
Allgemein
Schaltung und Bremsenteile
Lieferumfang
Pedalen
Ja, Plattformpedale
Bulls Copperhead 3S
Beschreibung
The Bulls Copperhead 3 S is a hardtail mountain bike that takes your performance to the next level. This is thanks to the lightweight aluminium frame which also has a very fine finish. This makes the Copperhad 3S a very good mountain bike for fanatic mountain bikers.The Copperhead's frame is made of lightweight aluminium. With the thru axles it steers very precisely and the discs are sure to be perfectly aligned at all times. The cables go neatly through the frame tubes, so they are well protected. So it doesn't just look nice but it also rides very well.
The assembly is mostly done with Shimano XT parts. The crank, the shifters and the rear derailleur are from the XT line. Many equally priced mountain bikes often save on these parts and therefore this Copperhead 3S performs just a bit better than many competitors. The Fox front fork gives very smooth damping, so you can easily ride over tricky obstacle. Moreover, with the lockout on the handlebars you can easily lock this front fork on asphalt. When you get back on the trail, the Magura MT 4 trail disc brakes with 180mm discs provide the necessary control and braking power.
This makes the Bulls Copperhead 3 S a very fine mountain bike ready to take your performance to the next level.
Lies mehr in unserem Blog
