Lezyne Pressure Over Drive Standpumpe

Lezyne Pressure Over Drive Standpumpe
134,83 13,88 rabatt
Auf Lager (10+)

  • Zustellung in 4 Arbeitstagen
  • Versandkostenfrei

Stell eine Frage über dieses Produkt

Schicke dem Kundenservice eine Mail
mantel-customer-service

Unsere Empfehlung für eine Tubeless-Standpumpe

Unsere Empfehlung für eine Tubeless-Standpumpe

Die Lezyne Pressure Over Drive ist eine Standpumpe, mit der du deine Tubeless-Reifen einfach aufpumpen kannst. Die zusätzliche Luftkammer gibt dir genug Volumen, um schlauchlose Reifen schnell in den Felgenrand zu setzen. Anschließend kannst du die normale Luftkammer verwenden, um den Reifen auf den perfekten Druck aufzupumpen. Mit dieser Pumpe benötigst du keinen Kompressor mehr, um die Reifen schlauchlos zu machen. Das genaue Manometer auf der Oberseite der Pumpe erleichtert das Ablesen des Drucks. Der luxuriöse ABS1 Pro-Pumpenkopf verfügt über einen Ventileinsatzentferner und ermöglicht es dir, die Luft aus dem Reifen abzulassen, ohne den Pumpenkopf abzunehmen. Aus all diesen Gründen ist dies unsere Empfehlung für eine Tubeless-Standpumpe.

Stärken & Schwächen

Stärken & Schwächen

  • The double pressure chamber makes it easy to seat tubeless tyres with this pump.
  • The ABS1 Pro pump head is suitable for both Presta and Schrader valves and has a function to purge air from the tyres for extra precision.
  • Because the tyre pressure gauge is on top of the pump, you can easily read the pressure very accurately.
  • The pump hose is reinforced with nylon and extra long.
  • To use the pump normally, you must first fill the air chamber with pressure. This takes a number of pump strokes.

Spezifikationen

Spezifikationen

Marke
Lezyne
Fahrradpumpentyp
Standpumpe
Was für ein Fahrrad hast du?
Mountainbike / Rennrad
Geeignet für Ventil
Presta / Schrader
Typ Manometer
Analog
Pumpendruck Typ
Hochdruck
Befestigung des Pumpenkopfes
Schrauben
Pumpenfußmaterial
Aluminium
Material der Pumpe
Stahl / Aluminium
Alle Spezifikationen

Beschreibung

Beschreibung

The Lezyne Pressure Over Drive is the ideal floor pump for tubeless thanks to the extra air chamber.

High pressure
The Pressure Over Drive has the ability to pump up to 220 psi or 15 bar. As a result, there is no bicycle tyre that you cannot get to the correct pressure. The only drawback of the extra air chamber is that it has to be filled before you can inflate a normal bicycle tyre. To inflate an inner tube or tubeless tyre that already has pressure in it, you will need to match it before you can increase the tyre pressure.

High-quality design
The Pressure Over Drive is made of high-quality and strong materials, such as aluminum and steel. Not only does this ensure the pump lasts a long time and looks good, these materials also enhance the pump's performance. As a finishing touch, this pump has an ergonomic wooden handle and a sturdy base for extra stability. Because the pump stroke is extra long, every tire can be inflated with the greatest of ease. Furthermore, the pump hose is reinforced with nylon. This increases durability. A pump hose often suffers a lot and is often one of the parts that wears the fastest. With this reinforcement you don't have to worry about that.

Tubeless
Proper seating of a tubeless tyre is made easier if a lot of air is pumped into the tyre in a very short time. The secondary pressure chamber of the Lezyne Pressure Over Drive makes this very easy. All you have to do is build up the air pressure in the pressure chamber. When you have built up enough pressure, push the lever at the bottom of the pump with your foot. This discharges the pressure chamber and forces a powerful and continuous stream of air into the tire within seconds. This ensures that the bead of the tyre seats easily.

Technologie

ABS1 Pro
The letters on the ABS1 Pro pump head stand for Air Bleeding System. With the ABS1 Pro pump head you can easily let air out of the tire by just pressing a button. This allows you to adjust the tire pressure exactly to your wishes! Furthermore, the ABS1 Pro is suitable for Presta and Schrader valves. By simply turning the attachment of the pump head you can switch between the two types of valves. The ABS1 Pro is at a 90 degree angle. This, in combination with the long pump hose, makes it easier to reach the valve. To top it off, the ABS 1 Pro pump head also has a built-in valve core remover.

Colour: black
Maximum pump pressure: 220 psi / 15 bar
Mehr anzeigen Weniger anzeigen



Empfohlen von Ihrem Produktspezialist


Mögliche Alternative

Mögliche Alternative

Lezyne Pressure Over Drive
Lezyne Pressure Over Drive
134,83
Dieses Produkt
Topeak JoeBlow Booster
Topeak JoeBlow Booster
134,83
SKS Rennkompressor NXT
SKS Rennkompressor NXT
Ab 94,17
SKS Rennkompressor EVA
SKS Rennkompressor EVA
49,54
Obenstehende Produkte vergleichen
Lezyne Pressure Over Drive Topeak JoeBlow Booster SKS Rennkompressor NXT SKS Rennkompressor EVA
Lezyne Pressure Over Drive Topeak JoeBlow Booster SKS Rennkompressor NXT SKS Rennkompressor EVA
5 Bewertungen 18 Bewertungen 0 Bewertungen 103 Bewertungen
Fahrradpumpentyp Standpumpe Standpumpe Standpumpe Standpumpe
Was für ein Fahrrad hast du? Mountainbike / Rennrad Mountainbike / Rennrad Elektrorad / Gravel Bike / Mountainbike / Rennrad / Citybike Elektrorad / Gravel Bike / Mountainbike / Rennrad / Citybike
Geeignet für Ventil Presta / Schrader Presta / Schrader Presta / Schrader / Dunlop Presta / Schrader / Dunlop
Typ Manometer Analog Analog Analog / Digital Analog
Pumpendruck Typ Hochdruck Hochdruck Hochdruck Hochdruck
Befestigung des Pumpenkopfes Schrauben Klemmen Klemmen Klemmen
134,83 134,83 Ab 94,17 49,54
Dieses Produkt Produkt anzeigen Produkt anzeigen Produkt anzeigen

Alle Spezifikationen

Allgemein

Marke
Lezyne
Fahrradpumpentyp
Standpumpe
Was für ein Fahrrad hast du?
Mountainbike / Rennrad
Geeignet für Ventil
Presta / Schrader
Pumpenfußmaterial
Aluminium
Farbe
Schwarz

Eigenschaften

Typ Manometer
Analog
Pumpendruck Typ
Hochdruck
Befestigung des Pumpenkopfes
Schrauben
Material der Pumpe
Stahl / Aluminium
Tubless Druckkammer
Ja
Typ Pumpkopf
Einzelner Pumpenkopf
Druck (max.)
15 Bar